Launch Windows programs with the specified parameters in the shortcut. Online store of unique items Shortcut in cs go launch options

fps_max 101

rate 25000

cl_cmdrate 101

cl_updaterate 101

cl_interp 0.01

ati_npatch "1"
ati_subdiv "2"

The default values ​​(1 and 2) of these commands are mainly set by owners of ATI video cards. Set nVIDEA to 0.
If you have these default values, then the sense during clamping becomes an order of magnitude smaller. And if they are “zeros”, then the sensor is default and you control each cartridge.

gl_polyoffset "0.1"

This command depends on the video card. Players with nVIDIA video cards set 0.1, and those with ATI set 4.
If you put it under your card accordingly, then shooting is more comfortable.

cl_crosshair_size "1"

There are only three sight size values: “1” is also “small”, “2” is “medium”, “3” is “large”.

cl_dlmax "80" "128" "512

For the pirated version cs: 80 and 128. For the licensed version available cs: from 80 to 512
This setting is responsible for returning the sight to the default position after recoil.

m_filter "0"

The command is responsible for mouse filtering (smoothing mouse movements).
If you have the value “1”, then aiming becomes smoother and it is easier to shoot from the deagle.

hpk_maxsize "4"

There are two main values ​​- 0 and 4. At "0" the shooting is "scattered", and at 4 it is more crowded.

viewsize "120"

The main values ​​are 110 and 120. At 110, bullets fly from the top of the sight, and at 120 from the center of the sight.
If at 120 you are knocking "heads" with AK, then at 110 you have a great clip with m4a1. was relevant in version 1.5, in Steam 1.6 after the update the difference in values ​​is not noticeable.

Setting up Video Card and Mouse for Counter-Strike 1.6

Vsync must be turned off

Vertical synchronization (vsync) means that the frames that the game engine renders are synchronized with the refresh rate of the monitor.

If it is turned off, then the game sends a new frame to the monitor at the moment when it has calculated it, regardless of where the monitor’s electron beam draws the picture on the screen. In this case, a new frame may well begin to be drawn even from the middle of the screen, because of this characteristic “gaps” in the picture are formed, which are easy to notice, for example, when strafeing near a box. When synchronization is turned on, the picture always looks perfect.

NVIDIA >> Select the item “Refresh Override”, check “Enable” and check “640*480”, “800*600”, “1024*768” (if the monitor allows it) - 100Hz. For 1024*768 you can use 85 or another refresh, because Not all monitors support 100 Hz at this resolution. This, by the way, is one of the reasons why pros rarely play at resolutions higher than 800*600.

2) Mouse

Ddrivers At professional tournaments, only standard Windows XP drivers are used, so there simply shouldn’t be any others on a properly configured computer. b. Acceleration Acceleration is the acceleration of mouse movement. It was invented to improve the convenience of working with large desktop resolutions. Acceleration lies in the fact that the distance the cursor moves on the screen and the distance the mouse moves on the mousepad are related nonlinearly. This helps, on the one hand, to carry out precise small movements mouse, and on the other hand, in order to move the cursor from corner to corner, you don’t need to move the mouse several times, just move it more sharply. If we talk about games, then the faster we move the mouse, while moving the same distance along the mat, the greater the angle the sight rotates. This feature is very useful in Quake3 and similar shooters, but not in CS. The main thing here is precision, so that the movement of the sight absolutely exactly corresponds to the movement of the mouse on the carpet. Without this, stable, accurate shooting with a “flick” (i.e., with a jerk, especially for AVP, although with other weapons to a lesser extent) is impossible, and therefore almost all pros play with acceleration turned off. Windows has built-in acceleration, which is registered in the registry. It can be turned off in two ways: - mousefix - noforce commands - mousefix. Officially approved by the CPL (Cyberathlete Professional League). Makes changes to the Windows registry and is activated only after a reboot. -noforce -commands. Added to the launch shortcut -game cstrike -noforcemaccel -noforcemparms Also disables the axel, no reboot required. The method is simpler and more convenient, because both those who disable acceleration and those who play with it can play on the same computer without problems. To do this, simply create two shortcuts, one with noforces, the other “normal”. In addition (!), there is a second source of acceleration. The “Increased pointer precision” checkbox is in the mouse properties. To completely disable acceleration, you must always disable it. Checked Whether the acceleration is turned off is also easy. We place the mouse on the edge of the mat, smoothly turn to the right, and then sharply pull the mouse back to the edge, if the sight is to the left of the original position, then there is acceleration...

Setting up sound in Counter-Strike 1.6

hisound Enables high quality audio: 1=22kHz, 0=11kHz

Nosound Turns sound off(1) or on(0)

Playvol Demo playback volume

s_2dvolume Maximum volume of 2d sound (0 - 1)

S_a3d enables(1), disables(0) A3D support

S_automax_distance Sets the distance for maximum volume

S_automin_distance Sets the distance for minimum volume

S_buffersize 65536 sets the buffer size in bytes

S_disable_a3d disables a3d
s_distance 60 in general, the higher the value, the closer everything is heard

S_eax enables(1) or disables(0) EAX support

S_enable_a3d enables a3d

S_geometry enables (1) or disables (0) geometric partitioning (a3d 2.0 only)

S_max_distance is the maximum distance when the player can still hear sounds (s_min_distance - infinity)

S_min_distance minimum distance when the player starts hearing sounds (0 - s_max_distance)

S_numpolys number of polygons processed in a3d

S_occfactor is the permeability of the material, that is, how much the material muffles sound (0 - 1)

S_refdelay minimum distance between sources and the nearest reflection

S_verbwet controls the "dryness" of sounds... the higher the value, the more "wet" the sound

Speak if some keywords are specified in the parameter, then you will hear them through headphones or speakers, for example speak mesa

Stopsound stops playing the current sound

Ambient_fade 100 sets the distance at which sounds "included in the map" are heard, for example music on cs_italy

Ambient_level sets the volume for built-in sounds (see above)

Practical Settings (microphone)

1. voice_loopback 1 - Create a server and type the command voice_loopback 1 in the console. Now say something. What you hear in your headphones is how others hear you. Now choose the optimal volume of your voice and the distance from your mouth to the microphone.

2. voice_scale x - This command sets the volume of everyone's voice, including yours. x - specified value

3. voice_overdrive N - Attenuates all sounds (gunshots, etc.) N times when someone speaks. The optimal value is from 1 to 2.

4. voice_overdrivefadetime x.xxx - Defines the time in seconds during which the effect of weakening ambient sounds will be in effect (see the previous command). Optimally 0.4.x.xxx - specified value

7. voice_fadeouttime x.xxx - Affects the fadeout time of your voice. Leave it at about 0.1.

Launch parameters- these are certain commands that allow you to activate or deactivate certain functions for cs go, such as launching cs in a window, activating additional streams, disabling the initial screensaver.

Launch parameters are set in the properties of a particular game, in our case in the properties of cs go.

1. Go to the library, find Counter-Strike: Global Offenisve there
2. Right-click and find the tab properties. Click.
3. A small menu opens, look for a tab in it Are common, then select Set launch options.
4. Enter the parameters that we will discuss below, click Ok

Standard commands for CS GO in launch parameters

For the lazy (These are the most standard ones, more details below)
-refresh 144 -tickrate 128 -novid

List of CS: GO Start commands:

Automatic launch of the console when the game starts, it is shoved into all guides as necessary, in general I think that this function is completely useless.

Disables the tedious startup screensaver, now when you start CS, you immediately get to the main menu.

Enables high priority game mode, can increase FPS in the game.

Nonsense, nonsense, nonsense. This option may harm some users, carefully compare FPS and system performance before and after activating this option. By the way, it happens that the mouse lags in CS, and it is precisely this parameter that can cause harm. Test it.

Sets the tickrate to 128 on a local server, for example with bots. The standard number for the MM server is 64. With this parameter, the characters' movements become smoother, however, if you have a low FPS, it is recommended to leave it at 64.

This command loads information about textures, particles and other objects not in the game itself, but when logging into the server, therefore, you do not need to wait in the pistol round for the computer to load the smoke or other card effect. Recommended for inclusion.

Opens the game in full window.

Opens the game in a window.

Opens the game in full screen in a window.

W/-width
-h/-height

W or width ( width) -h or height ( height). With these parameters we can adjust the size of the game window. For me it looks like this: -w 1280-h 720

Here we will set the refresh rate. It all depends on the Hertz voltage of the monitor. Use this option if your monitor is more than 60Hz. For a 120Hz monitor set -refresh 120, if your monitor is 144Hz in turn set -refresh 144. Instead of -refresh you can also use -freq

With this command we can change the language in CS: GO by entering, let's say -language english we get English language on the menu.

Here we set the number of cores, not threads, but cores (This has already been discussed and an official response from CS GO support has been received). View the number of cores of your computer in the Task Manager in the “Performance” tab.

There was talk that this parameter is no longer supported, so you can use the mat_queue_mode 2 parameter. This parameter will automatically assign all available cores to CS GO. The value of this command can also be set in the video.txt file, which is located in the \cfg\ folder.

Using this parameter we can turn off blood and cruelty in CS GO. After activating this option, players will stop bleeding. This will probably increase the FPS in the game, but you will lose the ability to understand whether the enemy was hit or not.

Interesting fact: Previously, when this parameter was activated, instead of a corpse, the terrorist took the pose of an arrested person with his hands on the back of his head.

This command disables some directx 9 features. For older computers, this command may increase the FPS.

Haha, let's, just in case, ban the use of the joystick in the game.

Using this command, error data will not be displayed in the console (Red inscriptions)

Here we can specify a configuration file that should be automatically loaded when the game starts.

Many of you have probably heard about launch options in cs go, but not everyone knows what they are for and which of them can really benefit your PC. What are launch options? These are commands that tell the game to perform some action when loading or to launch the game with certain settings. Good settings launchers will not only ensure a smooth skating rink, but will also make your life easier. For example, you can change the screen resolution when opening cs go or skip the introductory video (to save time).

CS GO launch settings - useful commands

• -novid – disables the introductory video when entering the game
• -w 640 -h 480 – you can set the screen resolution at startup. Instead of 640 and 480, put your values
• -console – turns on the console in the game
• -freq 120 – sets the monitor to the required screen refresh rate. It only makes sense to use it if you have a 120 or 144 Hz monitor.
• -high – starts the game in high priority mode. This may help players with weak computers. It makes no sense to use it if you have a powerful PC.
• -threads 4 – tell the game how many cores you have. If you have two cores, then instead of four we put two; with six cores we set it to six. Look in the game to see if this team has any impact. If not, you don’t have to register
• -fullscreen – launch cs go in full screen mode
• -language English – sets the language. At the same time, you may have steam in Russian, and cs go in English
• +rate 124000 - maximum amount of data received by the host (bits/sec.)
• +cl_cmdrate 128 – maximum number of packets sent to the server
• +cl_updaterate 128 – maximum requested package updates from the server
• -noaafonts – disables antialiasing. Helps increase FPS in cs go
• +exec autoexec.cfg – launch a pre-configured config
• -window - to run the game in windowed mode
• -noborder – launches cs go in windowed mode without a border
• -low – you can set not only high priority, but also low
• -dxlevel 81 – setting DirectX to version 8.1
• -dxlevel 90 - setting DirectX to version 9
• -heapsize 262144 – this parameter allocates 512MB of RAM
• -heapsize 524288 - allocates 1GB of RAM
• -heapsize 1048576 - allocates 2GB of RAM
• -noaafonts – this command disables screen font smoothing
• -refresh 100 is a special parameter for changing Hertz for HL2 Engine monitors.
• -soft – enables CS in graphical mode Software
• -d3d – enables CS in Direct3D mode
• -gl – enables CS in Open GL graphics mode
• -nojoy - disables the joystick
• -noipx – disables the LAN protocol
• -noip - removes the IP address without the ability to connect to servers
• -nosound - turns off the sound in cs go
• -nosync - disables vertical sync
• -console – provides access to the developer console
• -dev - enables the developer mod
• -zone # - allows you to allocate more memory to files such as autoexec.cfg, etc.
• -safe – allows you to run cs go in safe mode plus disables audio
• -autoconfig – resets video settings to standard
• -condebug – saves logs to console.log file
• -nocrashdialog - to cancel the display of some errors (memory could not be read)
• -toconsole - to launch the game engine in the console if the map is not defined with +map
• +a +r_mmx 1 - to launch the game using a cvar command on the command line (instead of cfg)
• -tickrate 128 – server update rate
• -m_rawinput – whether the Windows settings will affect the mouse sensor
noforcemspd - mouse speed is the same as in Windows
• -noforcemaccel - disable mouse acceleration
• -noforcemparms - use mouse button settings as in Windows

Of course, 80% of the teams described above are for some cybernerds. I listed them just in case. And I recommend borrowing the optimal launch parameters for cs go from the Navi team.

Launch options for professional players

Pro players certainly know what needs to be written down there. It's unlikely they're missing out on anything. Let's see what Natus Vincere players have there. Launch options for top Natus Vincere CS:GO players

Launch parameters for Arseny "ceh9" Trinozhenko:

W 1280 -h 720 -novid -freq 144 +rate 128000 +cl_interp 0.01 +cpu_frequency_monitoring 2 +engine_no_focus_sleep convar 1 cl_obs_interp_enable 0 +cl_hideserverip -console

Yes, my roster is old, but essentially all eSports players have similar teams + they change them periodically. So there’s no need to worry too much. Take the one you like best.

How to set launch parameters in cs go - step-by-step instructions (in pictures)

Yes, I forgot the most important thing - to tell you how to install them (or rather, where to register them). To set launch parameters in cs go, you need to right-click in steam, select the properties tab and switch to the tab called “set launch parameters”, as shown in the figure below:

Popular questions

Let's quickly run through some common questions you may have.

Why do you need launch options?

For comfort. In fact, you don't have to use them at all. I personally haven't used them. I had enough of those in the game.

How to set screen resolution through cs go launch options.

This is done using the command -w 640 -h 480, where instead of these numbers you can put any resolution you need.

How to run cs go in a window

Commands that allow you to open cs go in windowed mode (this can be done in the settings inside the game or without entering the game, by adding the following to the properties):

• -windowed –w 1024 –h 768 – run in windowed mode, where w is the width and h is the height
• -noborder – Windows will not outline the game window with borders. It only makes sense to use it when running in a window. In this mode you can move it. To do this, use –x (distance from the left edge of the screen) and –y (distance from the top edge of the screen)

What to write in cs go launch parameters

You don't have to write anything at all. I've played like this all my life and it hasn't caused any problems. Yes, a weak PC, low FPS, etc. all this is unpleasant. But essentially there is only one way to influence them – updating the hardware. So don't worry too much. If you have a weak PC, I recommend that you first and then write in the console:

Novid -console -freq 60 +rate 128000 +cl_cmdrate 128 +cl_updaterate 128 -threads 4 -high +cl_interp 0 +cl_interp_ratio 1+fps_max (Your value)

Standard launch parameters for cs go

To return standard rate values, enter the following:

rate 80000; cl_updaterate 64; cl_cmdrate 64; cl_interp 0.03125; cl_interp_ratio 2; cl_lagcompensation 1

There are also another type of commands called " Launch parameters" These launch options allow players to change some general configurations to suit their specific needs, such as which version of DirectX to use, whether to run the game in full screen or windowed mode, whether to skip the CSGO splash screen to increase loading speed, etc. Some of these parameters are very important to increase FPS on weak PCs or just for a high-quality comfortable game.

What are launch options?

This additional options for finer CS:GO settings (commonly used by professionals) that can be specified before starting the game.

How do I set launch options?

To set cs go launch parameters, you need to follow a few simple steps:

1. Launch STEAM.
2. Right-click on the Steam icon and select menu " Library".
3. In the library, find Counter Stirke: GO, and right-click on it, in the window that appears, select " Properties".
4. In the window that opens, click on the button " Set launch options".
5. Important! CS:GO itself should not be running, otherwise the game will need to be restarted.

Or just watch the video below for an example of setting a launch parameter to enable Panorama UI:

List of cs go launch parameters commands

Basics

Novid (or -novideo)

Removes the VALVE splash screen that appears when you start cs go (helps speed up the loading of the game).

Opens the developer console immediately when the game starts.

To run the game in safe mode (mute sound, high video settings, etc.

Forcefully mutes the sound in the game.

To automatically load a config with the name "name"

The unit of measurement for sending and receiving data from the server per second, the higher the more accurately the server and client record, for example, the accuracy of hits. Set the tickrate you want to play at. The higher the better. This can be 64 (Steam servers) or 128 (dedicated servers, such as communities, face it, etc.). You can simply set the tick rate to 128, and the game will automatically adjust it if you connect to a server using a tick rate of 64.

Console command name

VAC

Insecure

Disables checking your csgo VAC. When you activate this option, you will not be able to access servers that use VAC.

Panorama

Panorama

Enable Panorama UI

The command is no longer supported.

Disable Panorama UI (Enables the old cs go interface)

Legacyscaleformui

The command is no longer supported.

Disable Panorama UI (Enables the old cs go interface). This option became available after the update was released on August 17, 2018. In the update dated August 30, 2018, VALVE disabled support for this command.

Mouse

Noforcearms

Uses mouse button settings from Windows.

Uses mouse acceleration settings from Windows.

Uses mouse speed settings from Windows.

CPU

Threads

Attention: This option should not be used. It is better to use all processor cores through the game settings, in the parameters Images.

Forces the number of cores that the game will use. For example -threads 4

Nosse4

Disabling SSE4 may slow down the processor. What is SSE4? - This is a new instruction set of the Intel Core microarchitecture, first implemented in the Penryn series processors (not to be confused with SSE4A from AMD).

High

Attention: This parameter can lead to a significant load on the processor, which in turn will lead to a decrease in its performance and a decrease in FPS output within the game.

Sets a high priority for processing csgo by the processor among other running applications.

Sets a low priority for the processor to process the game among other running applications.

D3D9EX launch option

D3d9ex

Parameter to reduce CPU memory usage by approximately 40%

Important: This parameter does not give any increase in FPS. It helps free up the processor cache, which in turn has a positive effect on minimizing the game ( ALT+TAB ). In most cases, cs go collapses in a matter of seconds. Previously, this took 5-12 seconds, depending on the characteristics of the PC.

This option appeared after the update was released on 03/07/2019

ATTENTION:

This parameter enabled by default for everyone starting from the update on 04/23/2019. Therefore, specifying it in the launch parameters is pointless.

Disable_d3d9ex

Use this option to disable D3D9EX if you encounter any problems with this graphics mode.

RAM

Heapsize

Allocates the amount of RAM for cs go with which the game will be forced to launch. Available values ​​are 262144, 524288, 1048576 - will launch the game with 512MB, 1GB and 2GB respectively.

Monitor frequency

Refresh (or -freq )

This option allows you to use a higher frame rate to improve gameplay. However, this can only be applied if your monitor supports higher frequencies such as 240Hz, 144Hz or 75Hz. You can use the -refresh 144 or -freq 144 parameter in the startup parameters, and check whether this works or not use the mat_info console command. The default value is 60 Hz.

Graphic arts

Dxlevel 81

To use DirectX 8.1

To use DirectX 9

Disabling DirectX. This option has been removed and is no longer used.

To run the game in graphical mode Software

To run the game in Direct3D graphics mode

To run the game in Open GL graphics mode

Forces vertical sync to disable.

To disable screen font smoothing.

To restore default video settings.

Screen resolution cs go

W<Ширина в пикселях>

For example, -w 1920

If you use this parameter, then -h is not necessary, the system will select the height automatically.

H<Высота в пикселях>

For example, -h 1080

will launch the game with a screen resolution of 640x480 pixels (optional).

Launches the game in full screen mode.

Starts the game in windowed mode.

To cancel the display of some errors (memory could not be read).

To allocate more memory to files like autoexec.cfg etc.

Language

Language

Available options:

russian Russian Degrades the Console font

english English Improves Console font

ukrainian Ukrainian

pirate

bulgarian Bulgarian

brazilian Brazilian

hungarian Hungarian

greek Greek

danish Danish

italian Italian

spanish Spanish

Korean Korean

german German

dutch Dutch

norwegian Norwegian

polish Polish

portuguese Portuguese

romanian Romanian

thai Thai

schinese Traditional Chinese

turkish Turkish

tchinese Simplified Chinese

finnish Finnish

french French

czech Czech

swedish Swedish

japanese Japanese

Launch options for FPS

If you have a weak computer, then we have selected launch parameters for you that will increase cs go fps.

Novid -console -threads 4 -high +rate 128000 +cl_cmdrate 128 +cl_updaterate 128 +cl_interp 0 +cl_interp_ratio 1 +fps_max 300 -noaafonts -nosync

Parameter -threads 4 indicates that your processor will use all 4 cores for CS:GO. If you have a different number of processor cores, indicate your number. Let me remind you that these cs go launch options for weak pc.