The fractured but whole black screen. Black Screen in South Park: The Fractured But Whole - How to Fix

Signs of pregnancy after embryo implantation

It turned out to be quite demanding on the hardware, despite the rather unpretentious graphics. As in the first part, it is full of various bugs and problems, many of them can be solved using our guide.

We present to your attention the minimum and recommended system requirements, which must meet the configuration of your computer.

System Requirements South Park: The Fractured but Whole

Minimum system requirements:
  • OS: Windows 7, 8.1, 10 (x64);
  • Processor: Intel Core i5 2400 or AMD FX 4320;
  • RAM: 6 GB;
  • Video card: NVIDIA GeForce GTX 560Ti with 2 GB of video memory or Radeon HD 7850 with 2 GB of video memory;
  • Hard drive: 20 GB;
Recommended system requirements:
  • OS: Windows 7, 8.1, 10 (x64);
  • Processor: Intel Core i5-4690K or AMD FX-8350;
  • RAM: 8 GB;
  • Video card: NVIDIA GeForce GTX 670 with 2 GB of video memory or AMD Radeon R9 280X with 2 GB of video memory;
  • Hard drive: 20 GB;

The requirements may seem a little too high since South Park: TFBW does not seem to be that much resource intensive. It's all the fault of the engine, which will not allow owners of weak computers to try out the game. In terms of optimization, there are not many complaints, but there are several serious bugs that many players who have purchased the game on Steam have encountered. One way or another, if your hardware meets the minimum requirements, then you have already done half of the job. You can find the solution to the rest of the problems later in this article.

Files, drivers and libraries

Before you start looking for your problem, you need to update your video card driver to the latest version:

A prerequisite for the successful functioning of any game is the availability of the latest drivers for all devices in the system. Download the utility Driver Updater to quickly and easily download the latest drivers and install them with one click:

  • upload Driver Updater and run the program;
  • perform a system scan (it usually takes no more than five minutes);
  • update outdated drivers with one click.
WinOptimizer

For complete happiness, you still need to update additional libraries:

Separate list for Microsoft Visual C ++:
  • (Download )
  • (Download )
  • (Download )
  • (Download )
Having done all these simple manipulations and checking the system requirements, you can be sure that the game will work correctly. However, some bugs and problems still remain. The following will describe how to solve them.

South Park: The Fractured but Whole Won't Start? Solution

If the game does not start, and your PC fully satisfies the system requirements, then you should try a few ideas. First, run the game as administrator. Then check if Uplay is working. It even makes sense to uninstall this service and reinstall it - sometimes the problem is in it. Finally, if your computer is equipped with multiple graphics cards, you should make sure that when launching South Park: TFBW, you are using the correct card that can run the game. You can check this in the control panel from your video card manufacturer.

Black screen when launching South Park: The Fractured but Whole? Solution

The most common problem faced by a huge number of people who bought the game. After pressing the "Enter" key on the start screen, the picture turns black, although the sound and the game continue to work. The simplest and most common solution is the Alt + Enter key combination to switch to windowed mode. Then you should go to the settings and return everything as it was. Alternatively, you can find the game configuration file and manually correct the parameters in it. If this does not help, then try to go to the folder with the game and run it as administrator. It is also worth checking the integrity of the cache, whether the latest version of the drivers is installed and whether the correct video card pulls up when starting the game (if there are several of them).

South Park: The Fractured but Whole freezes or freezes? Solution

If you have several video cards, then first check if, for example, a discrete card is used instead of the main one. This is a very common problem in the game that causes a lot of bugs and leads to very unstable application. In some cases, such as in battles, the game may freeze due to certain actions. This is an equally common problem that players face, and there is only one solution to it - to switch to windowed mode via "Alt + Enter". This does not always help, in other cases you will have to boot and try not to perform the actions that led to this error.

In South Park: The Fractured but Whole, does the sound hiss and diverge from the picture?

This bug was fixed mainly for those who ran the game on laptops. This is a rather odd performance issue that can be solved by lowering all settings, especially graphics quality.

Not saving progress in South Park: The Fractured but Whole?

There is a bug in the game - the ability to manually save the process is disabled. This occurs due to the hang of the previous save attempt. You should occasionally watch so that the save icon in the lower right corner does not spin endlessly. If this happens, then you need to roll back to the last save and check if everything works. If not, you will have to restart the whole game.

If your problem turned out to be more specific, or the method described in this article did not help, then you can ask other users in our "" section. They will help you promptly!

We thank you for your attention!

It turned out to be quite demanding on the hardware, despite the rather unpretentious graphics. As in the first part, it is full of various bugs and problems, many of them can be solved using our guide.

We present to your attention the minimum and recommended system requirements, which must meet the configuration of your computer.

System Requirements South Park: The Fractured but Whole

Minimum system requirements:
  • OS: Windows 7, 8.1, 10 (x64);
  • Processor: Intel Core i5 2400 or AMD FX 4320;
  • RAM: 6 GB;
  • Video card: NVIDIA GeForce GTX 560Ti with 2 GB of video memory or Radeon HD 7850 with 2 GB of video memory;
  • Hard drive: 20 GB;
Recommended system requirements:
  • OS: Windows 7, 8.1, 10 (x64);
  • Processor: Intel Core i5-4690K or AMD FX-8350;
  • RAM: 8 GB;
  • Video card: NVIDIA GeForce GTX 670 with 2 GB of video memory or AMD Radeon R9 280X with 2 GB of video memory;
  • Hard drive: 20 GB;

The requirements may seem a little too high since South Park: TFBW does not seem to be that much resource intensive. It's all the fault of the engine, which will not allow owners of weak computers to try out the game. In terms of optimization, there are not many complaints, but there are several serious bugs that many players who have purchased the game on Steam have encountered. One way or another, if your hardware meets the minimum requirements, then you have already done half of the job. You can find the solution to the rest of the problems later in this article.

Files, drivers and libraries

Before you start looking for your problem, you need to update your video card driver to the latest version:

A prerequisite for the successful functioning of any game is the availability of the latest drivers for all devices in the system. Download the utility Driver Updater to quickly and easily download the latest drivers and install them with one click:

  • upload Driver Updater and run the program;
  • perform a system scan (it usually takes no more than five minutes);
  • update outdated drivers with one click.
WinOptimizer

For complete happiness, you still need to update additional libraries:

Separate list for Microsoft Visual C ++:
  • (Download )
  • (Download )
  • (Download )
  • (Download )
Having done all these simple manipulations and checking the system requirements, you can be sure that the game will work correctly. However, some bugs and problems still remain. The following will describe how to solve them.

South Park: The Fractured but Whole Won't Start? Solution

If the game does not start, and your PC fully satisfies the system requirements, then you should try a few ideas. First, run the game as administrator. Then check if Uplay is working. It even makes sense to uninstall this service and reinstall it - sometimes the problem is in it. Finally, if your computer is equipped with multiple graphics cards, you should make sure that when launching South Park: TFBW, you are using the correct card that can run the game. You can check this in the control panel from your video card manufacturer.

Black screen when launching South Park: The Fractured but Whole? Solution

The most common problem faced by a huge number of people who bought the game. After pressing the "Enter" key on the start screen, the picture turns black, although the sound and the game continue to work. The simplest and most common solution is the Alt + Enter key combination to switch to windowed mode. Then you should go to the settings and return everything as it was. Alternatively, you can find the game configuration file and manually correct the parameters in it. If this does not help, then try to go to the folder with the game and run it as administrator. It is also worth checking the integrity of the cache, whether the latest version of the drivers is installed and whether the correct video card pulls up when starting the game (if there are several of them).

South Park: The Fractured but Whole freezes or freezes? Solution

If you have several video cards, then first check if, for example, a discrete card is used instead of the main one. This is a very common problem in the game that causes a lot of bugs and leads to very unstable application. In some cases, such as in battles, the game may freeze due to certain actions. This is an equally common problem that players face, and there is only one solution to it - to switch to windowed mode via "Alt + Enter". This does not always help, in other cases you will have to boot and try not to perform the actions that led to this error.

In South Park: The Fractured but Whole, does the sound hiss and diverge from the picture?

This bug was fixed mainly for those who ran the game on laptops. This is a rather odd performance issue that can be solved by lowering all settings, especially graphics quality.

Not saving progress in South Park: The Fractured but Whole?

There is a bug in the game - the ability to manually save the process is disabled. This occurs due to the hang of the previous save attempt. You should occasionally watch so that the save icon in the lower right corner does not spin endlessly. If this happens, then you need to roll back to the last save and check if everything works. If not, you will have to restart the whole game.

If your problem turned out to be more specific, or the method described in this article did not help, then you can ask other users in our "" section. They will help you promptly!

We thank you for your attention!

Today, almost none of the AAA-class games are complete without technical problems and, unfortunately, South Park: The Fractured But Whole is no exception to the rule. Many users complain that it often has a black screen right during the gameplay. In this guide, we are going to show you how you can get rid of this error.

How to remove black screen in South Park: the Fractured But Whole

First Option - Forced Windowed Mode

This method is the simplest and most effective, so we advise you to use it first:

  1. Activate.
  2. Wait until a black screen appears.
  3. Use the Alt + Enter key combination to switch to window mode.
  4. Then open the game options and set the resolution of your monitor.

It is possible that the third step will not lead to the disappearance of the black screen. In this case, it is worth moving on to the following methods of solving this problem.

Second option - Run the game directly

Another fairly simple method related to launching the game directly through its.exe file:

  1. Right click on the name of the game in the Steam library.
  2. Click on the "Properties" option and then click on the "Local Files" tab.
  3. Next, you need to click on the "Browse local files" label.
  4. Then launch the game through the SouthPark_TFBW.exe file.

Option 3 - Set a high priority for the game

If the previous method did not help you, then you should move on to more laborious methods. Don't worry, this option will not affect your computer in any way:

  1. Start the game.
  2. Use the key combination Crtl + Alt + Del after a black screen appears.
  3. Go to Task Manager and find the Processes tab.
  4. Right click on the game and click on the words "Go to details".
  5. Right-click on the already highlighted list of games.
  6. Click on the "High Priority" option and return to the game.

As a result, the black screen should disappear.

Fourth option - Change the startup parameter

If your game does not start or a black screen constantly appears, then write the following inscription in the launch parameter shortcut after specifying the path to the game: -window. See the screenshot below for more details.

Fifth option - Reinstall Uplay

If none of the above methods helped you, then all that remains is to uninstall Uplay and then install it again. Fortunately, this program does not weigh very much, and therefore you will be able to pull off this trick in just a few minutes.

If South Park: The Fractured but Whole crashes, South Park: The Fractured but Whole won't start, South Park: The Fractured but Whole won't install, controls don't work in South Park: The Fractured but Whole, saves not working in South Park: The Fractured but Whole - we offer you the most common ways to solve these problems.

First, check if your PC meets the minimum system requirements:

  • OS: Windows 7 / 8.1 / 10 (64-bit)
  • Processor: Intel Core i5 2400 / AMD FX 4320
  • Memory: 6 GB
  • Videocard: 2 GB (GeForce GTX 560Ti / GTX 650 / GTX 750 / GTX 950 / GTX 1050 or AMD Radeon HD 7850 / R9 270 / R9 370 / RX 460)

Be sure to update your graphics card drivers and other software

Before remembering the worst words and expressing them towards the developers, do not forget to go to the official website of the manufacturer of your video card and download the latest drivers. Often, specially optimized drivers are prepared for the release of games. You can also try installing a later version of the drivers if the problem is not resolved by installing the current version.

It is important to remember that you should only download the final versions of video cards - try not to use beta versions, as they may contain a large number of not found and not fixed errors.

Keep in mind that games often require the latest version of DirectX to be installed, which can always be downloaded from the Microsoft official website, for stable operation.

South Park: the Fractured but Whole not starting

Many problems with the launch of games happen due to incorrect installation. Check if there were any errors during the installation, try uninstalling the game and running the installer again, after disabling the antivirus - files that are often needed for the game to work are deleted by mistake. It is also important to remember that the path to the folder with the installed game should not contain Cyrillic characters - use only Latin letters and numbers for directory names.

It still does not hurt to check if there is enough space on the HDD for installation. You can try to run the game as Administrator in compatibility mode with different versions of Windows.

South Park: the Fractured but Whole crashes. Low FPS. Lags. Friezes. Hangs

First, install fresh drivers on the video card, from this the FPS in the game can significantly increase. Also check the workload of the computer in the task manager (opened by pressing CTRL + SHIFT + ESCAPE). If, before starting the game, you see that a process is consuming too many resources, turn off its program or simply end this process from the task manager.

Next, go to the graphics settings in the game. First, turn off anti-aliasing and try lowering the post-processing settings. Many of them consume a lot of resources and turning them off will significantly increase performance without significantly affecting the picture quality.

South Park: the Fractured but Whole crashes to the desktop

If South Park: The Fractured but Whole often crashes to the desktop, try to reduce quality of the graphics. It is possible that your computer simply lacks performance and the game may not work correctly. It's also worth checking out the updates - most modern games have a system for automatically installing new patches. Check if this option is disabled in the settings.

Black of black screen in the South Park: The Fractured but Whole

The most common black screen issue is a GPU issue. Check if your graphics card meets the minimum requirements and install the latest drivers. Sometimes a black screen is due to insufficient CPU performance.

If everything is fine with the hardware and it meets the minimum requirements, try switching to another window (ALT + TAB), and then returning to the game window.

South Park: the Fractured but Whole is not installed. Installation hangs

First of all, check if you have enough HDD space for installation. Remember that for the installation program to work correctly, the declared amount of space is required, plus 1-2 gigabytes of free space on the system drive. In general, remember the rule - the system disk should always have at least 2 gigabytes of free space for temporary files. Otherwise, both games and programs may not work correctly or refuse to start at all.

Installation problems can also occur due to a lack of internet connection or instability. Also, do not forget to suspend the antivirus during the installation of the game - sometimes it interferes with the correct copying of files or deletes them by mistake, considering it as viruses.

Saves not working in South Park: the Fractured but Whole

By analogy with the previous solution, check the availability of free space on the HDD - both on the one where the game is installed and on the system disk. Often, save files are stored in the documents folder, which is located separately from the game itself.

Controls not working in South Park: the Fractured but Whole

Sometimes in-game controls do not work due to the simultaneous connection of multiple input devices. Try disconnecting your controller, or if for some reason you have two keyboards or mice connected, leave only one pair of devices. If your controller does not work, then remember - officially only controllers that are defined as Xbox joysticks support games. If your controller is defined differently, try using programs that emulate Xbox joysticks (for example, x360ce).

Sound doesn't work in South Park: The Fractured but Whole

Check if the sound works in other programs. After that, check if the sound is muted in the settings of the game itself and if the sound playback device to which your speakers or headset is connected is selected. Next, while the game is running, open the mixer and check if the sound is muted there.

If you are using an external sound card, check the manufacturer's website for new drivers.

Gaming News

3 hours 38 minutes back 0 The Lord of the Rings: Gollum will visit PS5 and Xbox Series X 5 hours 9 minutes back 0 Rumor: new NVIDIA Ampere graphics cards will be released in the second half of 2020 5 hours 45 minutes back 0 DICE LA Leads Vince Zampella - Studio Will Begin New Game 6 hours 25 minutes back 0 PUBG Season 5 Story Trailer

Fans of South Park The Fractured But Whole are faced with an unpleasant situation when, after installation, the game does not start. Or errors appear during the installation process. Let's figure out what the reason is and fix the problem. The methods outlined in this article are not limited to South Park The Fractured But Whole. If not enough, the problem has not been resolved, read other materials on the site.

South Park the Fractured But Whole is not installed

If South Park The Fractured But Whole does not install, check to see if there is enough free space on your hard drive. The distribution requires free space, so a few gigabytes of extra space won't hurt. Many modern games require a significant amount of space.

South Park The Fractured But Whole installation is blocked by antivirus

Often, anti-virus programs, in the fight against viruses, protecting our computer from external threats, for security purposes, block numerous processes performed by the operating system. Sometimes this security is so strong that the antivirus blocks access not only to viruses, but also suspends some normal processes, possibly mistakenly considering them potentially vulnerable. Disable your antivirus during installation.

Cleaning your computer and restarting

Sometimes, a simple reboot of the system can solve many problems at once during the installation of games and their subsequent work. The same applies to programs, applications. There are many reasons: the computer is clogged with garbage, the system cache is full, the maximum allowable number of simultaneously running processes, perhaps some are frozen and not running, but they put a load on the system. Cleaning your computer and restarting will fix the situation.

No Internet access

Some game clients require an Internet connection during the installation process, providing access to the installation server or the update server. Make sure the quality of the connection, and if there is no Internet, be prepared for problems during the installation of South Park The Fractured But Whole. It is good if the system gives an error message. And if there is none, you can think for a long time and wonder why the toy is not installed.

South Park the Fractured But Whole not starting

Before looking for reasons why South Park The Fractured But Whole won't start, make sure that the installation itself was successful. Otherwise, if there were failures during the installation process, but at the same time the game was installed, it is impossible to guarantee the subsequent launch and performance. If it starts, you're lucky. What will happen next is unknown. Remember the installation process.

Reinstalling the game

Many gamers have repeatedly faced a situation where they had to reinstall games. This appears to be the case where reinstalling South Park The Fractured But Whole will fix the issue. What this is connected with is unknown, maybe the antivirus or firewall "ate" some files or something else at the time of installation, but after installing the game again, it starts and works. Uninstall South Park The Fractured But Whole and reinstall, paying attention to every detail during this process. Perhaps at some point the program will ask for additional files, etc.

There are times when installing on top of an already installed game solves the situation. The installer may prompt you to update the files. This eliminates the need for deletion. Well, something like this.

Finding information on the text of the error

Another option. Problems launching South Park The Fractured But Whole are usually accompanied by a corresponding system message. Search for the text of the error, as a result of which you will receive the most detailed answer, and, moreover, concerning this specific problem. Actually, the decision will not be long in coming. This will pinpoint the cause and correct the problem.

By the way, for some reason I always forget about it. Until I turn the whole computer over. But this one the method works at all 92%... It is enough just to hammer the text into the search and find a useful article. So you will definitely solve the problem, you do not need to send the PC to the workshop ahead of time and incur additional costs. There is a lot of useful material on the Internet - study it.

Launching South Park The Fractured But Whole as Administrator

Run the game as administrator. In our case, to run South Park The Fractured But Whole as administrator, you must right-click on the game shortcut and select Run as administrator... Subsequently, if this method resolves the problem, make it the default. Open Shortcut Properties, under the Compatibility tab, and check the box Run this program as administrator.

South Park The Fractured But Whole is not compatible with the system

Another obstacle to running South Park The Fractured But Whole may be incompatibility with your operating system. In this case, in the same place, in the Properties of the shortcut, add the checkbox Run the program in compatibility mode, select the required OS from the drop-down list.

.NET Framework not installed

A quite serious problem in launching South Park The Fractured But Whole is the lack of an installed .NET Framework library on the computer, which ensures the launch and maintains the performance of programs and applications, including games. This is a prerequisite and Microsoft .NET Framework must be installed on your PC.

There are different versions of the .NET Framework. The presence of one of them on the computer cannot sufficiently guarantee the correct operation of the program. If, for example, a library is already installed on your computer, but the game requires - download and install it. Reboot your PC. The previous version will not be deleted or overwritten. They will just work together.


Take advantage of programs that prepare your computer for the game to work properly, and help you avoid many problems and errors.

Operating system Software
Windows XP / 7/8/10
Windows XP / 7/8/10
Windows XP / 7/8/10

DirectX availability

Perhaps the most important condition, a requirement that must be met for games, including South Park The Fractured But Whole, is the presence of. Without it, no toy will work. Almost all distributions that require DirectX installed already include this set.

Typically, DirectX is installed automatically during installation. If it is missing from the distribution, download and install. It is not necessary to do this before installation, you can also after, but the presence on the computer is simply necessary. Download links are located above.

What if South Park The Fractured But Whole isn't working?

Do not despair if you have already tried all the methods and nothing helps, the game does not work. Perhaps these tips will seem too vague, incomprehensible, errors are still present. Reconsider, did you do everything right? If necessary, download another distribution of South Park The Fractured But Whole, if purchased from a store, contact the seller (manufacturer) for help. Maybe the disc is damaged, something is missing. This is normal, quite natural, it happens. Use a different distribution and reinstall the game.

As a last resort, there are situations when the operating system is still incompatible with South Park The Fractured But Whole. Update the system using Windows (via Update Center). The game will work. If the manufacturer has indicated compatibility, then it is responsible for this. Update your operating system.

Reinstalling the OS is an extreme case. Not sure about statements like "the operating system is pirated ... assembly ... will not work ..." or "hacked, pirate toy - throw it away ..."... The point that is worth your attention is to remember if there were any similar problems with other games, in particular those similar to South Park The Fractured But Whole. And if problems were observed, this suggests that it may be time to update something in the system or reinstall it. Thank you for attention!

Other materials

Related publications