Wood anchor. Varieties, installation methods

We all strive to surprise our loved ones, neighbors and friends with something like that. We have such a vein, although we try to hide it, it’s not entirely ethical. But the desire to surprise wins. One way or another, we offer you a product, looking at which there is something to think about.

We are talking about an iron object, which can be a nail or a bolt, which is in a wooden product, with cutouts. When considering, the question arises, how could a bolt or a nail be inserted there. On this occasion, you can organize a whole scientific conference.

Everyone will look at the product with curiosity, check if the edge part is glued through, through which, according to the logic, an iron part, a nail or a bolt should have been inserted. And hardly anyone will be able to guess that when boiling in water, wood becomes soft and if you use it, you get such a trick.

To make such a puzzle, a piece of board is taken and four huge thorns are cut into it. Then the outer thorn is dipped in water and cooked for 20 minutes. After that, the thorn is clamped in a vice and squeezed. They are left in this position for a day or two.

After that, take out the piece of wood and scroll from the side of the compressed thorn, which holds the shape, the hole. Insert a bolt or nail into the hole, then weld the outer thorn again and it takes its original shape. Now everyone will think about how the bolt got there.

2 years ago

Rope puzzle disassembly logic. I bought it here http://s.click.aliexpress.com/e/qHfVzkjO (Model 7) Hi! You're on the craft channel. I do various interesting things and show the process in detail. The most interesting playlists on the channel (in my humble opinion): 1. How to make a radio-controlled car: https://www.youtube.com/playlist?list=PLiepfArhO9k-BafmZgUuMILJsgg1J5z-W. 2. DIY crafts https://www.youtube.com/playlist?list=PLiepfArhO9k8c5qLnaZr6Xi7loWfM_c0h. Our contact group is waiting for you https://vk.com/sciencevetalofficial.

4 years ago

We make an unusual puzzle with our own hands! --- --- Subscribe to our VK group https://vk.com/senselessoff --- # puzzle # in two #puzzle # gravity puzzle # puzzle with nails # with your hands # how to make #howtomake # it's interesting # unreal cool

1 year ago

Puzzle store: https://cccstore.ru/ 🔥Competition for 100 BUCKS and a BOLT IN A BOTTLE puzzle: 🔥https: //goo.gl/dbq7SB 🔥 SUBSCRIBE TO THE CHANNEL🔥 In this video I revealed the secret of solving the puzzle impossible BOLT AND NUTS A can you learn how to solve it and get 100 bucks? This is the hardest puzzle in the world SUBSCRIBE my instagram: https://www.instagram.com/bondarenkoyt/ vlog channel: https://goo.gl/g97JyB Mail for commercial offers: [email protected] Production Music courtesy of Epidemic Sound "www.epidemicsound.com

11 months ago

Puzzle Store: https://cccstore.ru/ Choose your impossible puzzle: https://goo.gl/ktPXwf In this video I revealed the secret of solving the IMPOSSIBLE BOLTS puzzle. At first glance, this bolt cannot be separated from the second, but in the end I learned how to solve this puzzle. This is the hardest puzzle for a real guy. INDIVIDUAL BOLTS FOLLOW my instagram: https://www.instagram.com/bondarenkoyt/ vlog channel: https://goo.gl/g97JyB Mail for commercial offers: [email protected] Production Music courtesy of Epidemic Sound "www.epidemicsound.com

2 years ago

Today I will make a 3D puzzle. It will be a box with a lid that closes and opens due to the rotation in space. ************************************************* ********** Welcome to my Levsha channel, where I show you how to make various homemade products from wood, metal and more. Toys, souvenirs, complex and simple mechanisms, original gifts for girls and boys. You can also offer your idea, and I, if possible, will embody it in my homemade products! If you like homemade products, if you like original ideas, you are a creative person, or just a beginner "DIY", then this channel is for you! ************************************************* ********** My channel: https: //www.youtube.com/channel/UCQpB ... VKontakte group: https://vk.com/club23756609 Public Vk: https: // vk. com / veniaminlevsha This channel is for the decent: for mate, insult and "trolling" - Ban!

1 year ago

DRAW IPhone X here: https://youtu.be/xOdCJyJ80vM Puzzle Store: https://cccstore.ru/ In this video I have revealed the secret of solving the impossible puzzle BOLT IN A BOTTLE Can you learn how to solve it and get 100 BOXES? This is the hardest puzzle SUBSCRIBE my instagram: https://www.instagram.com/bondarenkoyt/ vlog channel: https://goo.gl/g97JyB Mail for commercial offers: [email protected] Production Music courtesy of Epidemic Sound "www.epidemicsound.com

8 months ago

How to make a Viking ax with your own hands and a hatchet as well. Etched metal with a welding machine. Link to our channel about treasure hunting https://www.youtube.com/channel/UCU0D3XK9zMOa9VWmcaul0lA?view_as=subscriber Donate to channel development: https://www.donationalerts.ru/r/77vitek77 Help in channel development: Webmoney: R112876662453 B393418052309 Instagram https://www.instagram.com/rita_sanko/ # FamilySanko # Joiner # Homemade

11 months ago

Puzzle Store: https://cccstore.ru/ I've been solving puzzles for many years, but solving CROSS IN A FLASK with chopsticks is an incredibly difficult task. SUBSCRIBE my instagram: https://www.instagram.com/bondarenkoyt/ channel with vlogs: https://goo.gl/g97JyB Mail for commercial offers: [email protected] Production Music courtesy of Epidemic Sound "www.epidemicsound.com

5 years ago

Ready jewelry rings for weaving: http://ali.pub/85qtw In this video I will show you how to make a beautiful chain from ordinary wire very simply and quickly at home and without special skills. With such a chain you can make a key chain, bracelet, collar, and also use it for decoration. To weave a chain, we need wire, wire cutters and any rod. It's very easy and simple !! You can find this video at: https: //www.youtube.com/watch? V = CL0cX ... Subscribe to my channel: https: //www.youtube.com/channel/UC31O ... I would be very happy to comment and likes. I also recommend checking out my friends' channels: https: //www.youtube.com/user/Svetlana ... and https: //www.youtube.com/channel/UC7bo ... Music: "Ice Flow" by Kevin MacLeod ( incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http: //creativecommons.org/licenses/b ...

6 years ago

My poll: http://bit.ly/RedKBPoll The Vine I mentioned: https://vine.co/v/hYjdJuZmUmT In this video I give tips on making cubing related YouTube videos while solve this impossible bottle puzzle. This impossible bottle had a note from Eureka Puzzle 3D. Good luck finding it! Mine was a gift and I have no idea where to get one. :) My facebook: http://facebook.com/redKB.FB My twitter: http://twitter.com/KennethBrandon My Google+: http: //google.com/+RedKB Find me on Vine: Kenneth Brandon: http : //bit.ly/KenOnVine My instagram: http://instagram.com/red.kb Here "s the gear I" m using: http://bit.ly/RedKB-Gear

07.12.2014.

Making another wooden puzzle, along the way, I try to analyze the purely technological difficulties arising from this and find ways and methods to "increase labor productivity" ...

All the experience I have accumulated allows me to confidently assert: most of the time is spent on adjusting the glued parts - turning with a file or, conversely, gluing pieces of veneer to increase the thickness of any element. The reason for this is insufficient (to put it mildly) high-quality initial bars, the cross-section of which, as I have repeatedly noted, should be as close to square as possible. The permissible deviation, it seems to me, should be no more than two tenths of a millimeter.

Lacking high-quality "precision" equipment for such sawing boards, I have to be content with an ordinary old circular saw. Despite the recently installed "modern" saw blade with a fine tooth, a number of problems remained - insufficiently high shaft revolutions, beats as a result of many years of wear (after all, REAL sailing yachts had to be built! And more than one ...)

In general, no matter how hard you try, the bars turn out to be very far from ideal. And, even if in the new miter box it is possible to cut them into quite acceptable blanks in the sense of perpendicularity and length, which is a multiple of the modular cube, then after gluing, a long and dreary "file revision" is inevitable ..

At the same time, I noticed for a long time: if the original bars turned out to be of quite high quality, it takes very little time to make a puzzle from them. And vice versa.

In this regard, I once made a "world-historical" decision to make a planer out of the hand-held electric plane in the arsenal. No sooner said than done!

The main constructive idea of ​​my "well and how" is pretty obvious - to prevent the plane from planing more than necessary. To do this, on an even piece of chipboard of a suitable size, I fixed two pine guides, on the upper edges of which I screwed strips of plastic with self-tapping screws, choosing their total thickness so that, sliding along them, the working plane of the planer was parallel to the base.

I don’t know about other planers (somehow I’ve never looked closely at them), but mine has a special ledge for planing a corner (as the joiners say - quarters). Therefore, the guide bars had to be made of different sections, and then additionally aligned with strips of polystyrene and Whatman paper.

Before starting planing, I measure the smallest thickness of the workpiece with a caliper and calculate the size of the lining (a set of plastic strips of different thicknesses, as well as cardboard and Whatman paper). The guides prevent the plane from dropping below a certain height, while, in several passes, ruthlessly shaving off everything that is above it, which, in fact, is required ...

Already the first full test cycle (from a blank to a finished product) showed the full consistency of my idea! The time spent on making the next puzzle has decreased DIFFERENTLY! And it is right!

Also in this "production and technological block" I present a number of improvements to my miter box.

First of all, I installed on the left side a wide abutment platform made of a piece of film-faced plywood, on which a piece of aluminum profile is attached for the most tight fixation of the cut-off workpiece. On the right side, I redid the restraining device. Now it is a bracket fastened with an M8 bolt, in which a long bolt rotates, also an M8 with a lock nut. The bolt is inserted into plastic attachments of various lengths against which the piece of wood rests.

I cut off a block, measured the length with a caliper, twisted, if necessary, a screw half a turn, fastened the nut, and - forward. With a song!

In order not to often rebuild the emphasis, I usually saw the parts into several puzzles at once, pre-selecting them for workpieces of the same section.

I glue the parts on a flat surface using homemade polystyrene square conductors.

Homemade wooden puzzle "Quartet 8L2".

This is a double puzzle: from four identical parts it is necessary to assemble either one "thickened" frame, or a kind of chain of two links. Wooden.

This puzzle is one of my students' favorites at children's art school. By the way, the problem of assembling one thickened frame has a very nice solution with central symmetry! It is necessary to arrange all four parts in a special way in relation to each other and then simply move them to the center at the same time ...

The idea of ​​this puzzle was prompted by a similar puzzle "Pyramid of balls", attached to No. 9 of the magazine "Entertaining Puzzles" published by DeAgostini. This puzzle is described in our project.

In addition, I, intending to do a certain amount of so-called. rope puzzles, not so long ago, quite successfully bought in the store "everything for needlework" all kinds of different wooden "jokes" - rings, balls, etc.

The only thing left to do was to sit down at the 3D modeling program Autodesk 3d Max and develop our own original version of the pyramid parts. The efforts were crowned with quite a worthy result, which even found its reflection on the site puzzlewillbeplayed.com.

My puzzle (in contrast to the aforementioned DeAgostinevskaya) has only one solution, which is confidently confirmed by the program.

Experience has shown that out of all the variety of puzzles I have made in a year and a half, children most of all like "miniatures", in which three or four parts are required to assemble a 3x3x3 cube. A short break is just enough to quickly deal with one or two of these tasks. As a rule, I advise children to do this in pairs - first, each one disassembles his puzzle, and then they change. Very comfortably.

In this regard (and at the numerous requests of students), in a very short time, I made several such puzzles at once, which are always popular with my students. All of them are approximately the same in terms of the complexity of both manufacturing and solutions. I highly recommend it to everyone. whoever reads these lines, make these puzzles, so to speak, for the home, for the family. In addition to the development of the volumetric-spatial thinking of your children and loved ones, the problem of how to keep the guests occupied while the dumplings are being cooked on the stove will disappear by itself (pizza is being baked in the oven, vodka is cooling in the freezer - emphasize the necessary) ...

I deliberately do not include the solutions to these puzzles here, so as not to deprive you of the pleasure of finding it yourself. For reference: the average record of our artist for the most difficult of them is 20-30 seconds. Are you weak ?!

Homemade wooden puzzle "Three Easy Pieces".

As the name suggests, the puzzle consists of three parts, which the author claims are simple. At the expense of the "simple", by the way, I would argue with him, for example ...

Homemade wooden puzzle "Corner Lock".

In addition to three intricately shaped pieces, this puzzle is accompanied by another modular cube, which, when the puzzle is completed, squeezes quite tightly onto the edge of the 3x3x3 cube. For decoration, you can paint it in a different color.

Homemade wooden puzzle "Neat Cakes".

Unlike the previous two, this puzzle is not a knot puzzle, but a packing puzzle. That is, it is advisable to make a box for its storage. In order not to lose the cakes ("Neat Cakes" means "neat cakes")

Homemade wooden puzzle "Cube Kid".

And now anyone can visit the personal site of Leonid Mochalov, where a large number of original developments of this inventor are presented. Some of his works were told on the project PhotoDreamStudio .

Below is a description of the puzzle "Baby Cube" by Leonid Mochalov.

Homemade wooden puzzle "Tom" s Little Box.

In this puzzle, the author, despite the minimum of funds, even managed to implement multi-pass! It is clear that level 2.3 is not so outrageous, but it can confuse another unlucky lover of "taking everything at once". Not paluchitza !!!

At our project, the "Stand Up Cube" puzzle was presented, which I called a real gem of my collection of wooden puzzles.

From the moment she passed through my hands, I have not abandoned the desire to create something similar myself. But I still don't understand how you can design a puzzle with gravity in mind ?! BurrTools does not provide this feature. At least, my knowledge of this program (or, more precisely, the English language) does not allow me to think otherwise ...

I had to resort to the old grandfather's method - a working life-size model. I sawed with a small supply of blocks with a length of 1, 2 and 3 modules and began to search for a stable shape from the resulting parts. For the temporary fastening of the elements, I first tried to use double-sided tape, but then switched to the Moment glue - it holds perfectly, and, if necessary, comes off easily.

As a stable form, after some deliberation, I decided to take the cross. And there is no need to look for any analogies here !!!

The main design was carried out in the Autodesk 3D Max program, and the stability check, as I said, on a real model.

Of course, it is not a difficult task to present a stable figure of a cross in the form of a set of some rather complex elements, if, moreover, the program "BurrTolls" is also brought in to help. But to achieve that the details were as simple as possible (similar to, for example, the elements of "Hein's Cubes"), and even that the required figure was assembled in many ways, but there was only one stable option - here I had to sweat!

However, after a certain amount of physical and mental effort, the goal was achieved!

But the most interesting was yet to come!

Having analyzed (now without any jokes) the elements of my brainchild in the "BurrTools" program, to my great joy and surprise, I discovered that out of these ten different parts, with a total volume of 48 cubes, in addition to a stable cross, it is possible to add a large number of different shapes, including a 4x4x3 block, which is perfect for packaging!

This is how my very interesting author's puzzle "48 cubes" was born!

Many of the figures I have invented have only one solution, but even, for example, packing in a box, despite the presence of more than 20 thousand options, is very, very difficult. In addition to the "Cross", I found several more "stable" figures. That is, this puzzle game can be safely used as a construction set for children!

Watch the video of the step-by-step assembly of the "Standing Cross" puzzle:

Below are pictures of some figures that can be folded from the parts of my author's puzzle "48 cubes" with an indication of the number of possible options.

A separate series of tasks is the assembly of parallelepipeds. I draw your attention to the fact that the assembly of some boxes does not require the entire set of ten parts!

The puzzle game "48 cubes" fully belongs to packaging, so a box is needed to store it. From my own AUTHOR'S experience, I know that putting all the parts back into the box sometimes takes a lot of time, and somehow everyone does not get to remember at least one of the 23,000 solution options (or rather, the head). Therefore, I publish the scheme of packing ten pieces of the puzzle "48 cubes" into the box.

Looking ahead, I will say: it somehow happened that lately I gradually began to make mostly my own, author's puzzles. And it pleases! The process has begun!

In the next issues, I will introduce the project visitors PhotoDreamStudio with several of my own, I'm not afraid of this word, really cool, original and DIFFICULT puzzles! See you!

Recently, I am starting to think SERIOUSly about making my puzzles not only for myself (my beloved), but also for sale (for money). I intend to carry out the main body movements in this direction in the spring, but now I am ready, in principle, to start doing something on order. So write [email protected] !
As they say, if we agree on the price and timing, then I will do it and send it.

You always want to do something that will be incomprehensible to others. Simply put, the trick over which you can smash your head and how it is done is kept secret. It is to such puzzles that the following craft belongs, which you can make yourself.

To do this, take a wooden board, approximately 200 x 70 x 30, and make two, three cuts in it, so that you get 3 or 4 spikes, protrusions with a height of 40 mm. Something like a comb with several teeth. After that, we lower the outer thorn in hot water and cook it for 20 minutes.

During the cooking process, the wood is filled with water and becomes elastic, so it can be compressed, but with great effort. We take the workpiece and insert it with a welded thorn in a vice. We squeeze the spike, which becomes shorter, and leave it in a vice for a day or two.

After that, we take out the workpiece from the vice and drill a hole in it from the side of the crushed thorn. Insert the bolt. We again boil the outer thorn in water, where it is restored to its original appearance.

The finished craft can be polished and varnished, so many will take it in their hands and wonderingly solve the riddle, how did the bolt get into the middle?

All photos from the article

Are anchor bolts suitable for wood? How to properly fix a massive product with an anchor to a wooden beam or wall - a lantern, a chandelier or a hanging bed? What other ways can wooden structures be connected? Let's figure it out.

Types of anchors

The word "anchor" itself is borrowed from the German language and literally means "anchor". Anchors are used for.

The following types of these fasteners can be distinguished:

Useful: adhesive anchors can often be found under a different name - chemical.

Now let's try to analyze which type of anchors is suitable for which:

• The Molly bolt requires significant voids within the structure. As a result, it can be used only for hanging relatively light products on thin partitions made of boards, lining or chipboard;