How to make red rails in minecraft. Details on how to make rails in the world of Minecraft

Today we will talk about how to make rails in Minecraft world. The railway provides an opportunity to significantly reduce travel time. It is not enough to have a trolley and ordinary rails in order to increase the speed of movement. The intended path can be followed, but it will be very slow. In the game, the main accelerator is electric rails, but in order to create them, many difficulties must be overcome.

Minecraft world: how to make energy rails?

We will need This component is the main one in deciding how to make the rails. Since gold can be hard to mine, electrical lines become a valuable block. Several methods can be used here. For example, melt or combine nuggets. You can also do the destruction of zombie pigmen. most popular and in a simple way smelting of gold ore is considered. It will take 6 ingots to create six electric rails. The next stage is red dust. It is necessary to find a block of such ore, take a pickaxe and destroy it. Usually 4-5 units of red dust are obtained from one element. In the world of Minecraft, it is a kind of "wire". It takes one red dust to get 6 units of electrical mains. Also, to solve the question of how to make rails, we need a stick, we will get it. To do this, you need to cut down a tree and make boards. Of these, you need to get sticks. This element can be used for both simple and electric rails.

Process of creation

It is necessary to place gold ingots along the edges, put red dust down, and a stick in the center. If you plan to create a large number of electric rails at the same time, then you need to increase the amount of resources several times. To make the maximum number of blocks from the available materials, you will need to press the Shift key and click on the crafting window.

Acceleration process

In the event that electric rails are installed next to the usual ones, the opposite effect will occur - the trolley will brake. Countering this state of affairs will require the use of a red torch and a pressure plate. Thanks to this, the electric rails will be activated and the trolley will be able to increase its speed. But over time, it will still begin to fall. It is constantly necessary to alternate electric and conventional rails so that a high speed is maintained throughout the entire time. The proportion can be changed depending on the situation. So we figured out how to make rails.

In this article, I will teach everyone how to make three types of rails in the world of Minecraft. Rails in this exciting game very helpful. For example, with the help of them you can lay your railway anywhere. It will be very useful if you build a railway to your mine, in order not to carry home the resources extracted in the mine. There are three types of rails in the game: simple, energy rails, rails with a sensor.

How to make simple rails

To make simple rails, for this we need the following resources: 6 iron ingots, 1 stick. We coordinate in a certain way on our workbench and get rails in the amount of 16 pieces.

You should know that it is not worth laying simple rails downhill, as this is not effective. You will not be able to drive the trolley up a steep hill. To climb a steep mountain, you need to lay energy rails.

How to make energy rails

To make energy rails you need the following resources: 6 gold bars, 1 stick, 1 red dust. We coordinate all this on a workbench and get energy rails in the amount of six pieces.

Energy rails increase the speed of the minecart on the rails. The energy rails will not be active, or rather, I will not accelerate your cart, unless you put a lever or a torch on the side of the rail. Putting a torch near such a rail, you will immediately see that it is active, by the way it will glow brightly.

How to make rails with a sensor

To make rails with a sensor, we need resources such as: 6 iron ingots, one pressure plate, one red dust. Having added the resources in a certain way on the workbench, we will get rails with a sensor in the amount of six pieces.

Strange as it may seem, but rails alone are useless. In order to move around them, we need a trolley.

How to make a trolley

The trolley is intended for movement and transportation of cargo. In order to make a trolley, we need 5 iron ingots, and stack them in a certain way on a workbench.

General information. Minecraft is very popular game despite its design. Gamers are attracted to it because it virtual world you need to constantly do something, and each time the process becomes more difficult, but no less interesting. Only this can explain such a high interest in this game. As soon as the player gets comfortable in Minecraft and gets a small farm, he should craft the rails, then it will be much easier for him to do certain work. However, this is not entirely easy, since you will have to extract certain resources, which will take time. But it's worth it, so you shouldn't be lazy, it's better to roll up your sleeves and get to work. Ordinary rails in Minecraft are created quite simply, but they will require a lot of resources.

Rail types. There are several types of rails in minecraft, namely ordinary, electric and push. All of them will be required during the game, so sooner or later you will have to craft them. So, for ordinary rails, the following resources will be required: 6 iron ingots and 1 stick. The result is 16 rails. However, to build a decent railway, you will need a lot more resources, and this should be taken into account. However, in this case, it will be possible to quickly transport the elements necessary for crafting. Moreover, the delivery of goods on rails will significantly save the player's time and effort. After all, they can be spent on crafting useful things. However, conventional rails will require a trolley and always with an electric motor, which threatens with unnecessary costs. But you can make energy rails.

Energy burners. Many are wondering how to make energy rails in Minecraft, because they will help save a lot of resources. After all, their advantage is that the trolley moves along them on its own without anyone's help, and it will also not be necessary to spend external energy sources. As a result, the player does not have to additionally create an electric motor. However, energy rails have enough disadvantages, for example, they are fixed and collapse if water gets on them. It is worth remembering that they have 2 states, namely activated and deactivated. In the first case, the trolley accelerates; in the second case, it slows down. However, despite their shortcomings, energy rails in Minecraft are a necessary thing, so you should start crafting them as soon as you have free time.

Creation of an energy rail. So, it's not so easy to play Minecraft. Not everyone knows how to make energy rails in this game, but many are interested. And crafting them is easy enough, but it will all require some rare resources. So, to create them, you need to have in stock: a stick, 6 gold ingots and red dust. After all this stuff is in hand, these components will need to be folded in the right order. As a result, you get 6 units of energy rail. Undoubtedly, crafting this element may seem too expensive, but you should not be upset, because thanks to it you will be able to save a lot of time, you just need to know not only how to craft energy rails in Minecraft, but also how to use them correctly and skillfully.

The use of energy rails in Minecraft. Knowing how energy rails are used in this game makes life easier for the player. So, they can accelerate the minecart by 64 blocks, as a result, it is possible to put one such rail after every 64 normal ones. When you do not want the cart to lose speed, it is recommended to reduce the interval to 25 ordinary rails. As a result, you can achieve its maximum. If you need to climb a mountain, you should install 1 energy rail through 2 ordinary ones. So you can move with a breeze throughout the entire playing area, but energy will not be wasted. These simple rules will help save time, and most importantly energy. That's why you shouldn't put off crafting such an element as energy rails in Minecraft.

Trolley. To make any thing in this game you need to know the recipes. Minecraft rails in this case are also no exception, but it’s not enough to craft only them, because in order to move along the railroad, you need to make a trolley from the most ordinary iron ingots. Then it is recommended to install a stove in it, which will be the driving force. It is worth knowing that the presence of a chest will make it possible to transport many resources over long distances, however, in this case, energy rails simply cannot be dispensed with, since they will ensure continuous movement. If we talk about the features of railway tracks, then, for example, ordinary rails can be swivel, while energy rails do not have such an opportunity and are laid out only in a straight line. That is why at the corners when laying them, ordinary ones are placed.

Railway craft rules. To master the railway craft, you will need to learn several simple rules. First of all, it should be remembered that the trolley at the intersections will always turn only to the south or east. When another rail is brought to the turn, the train in this case, when passing along it, will go straight, and will not turn anywhere. As for the turns, in order for the trolley in this game to go in the selected direction, it is recommended to create descents in this section on the turns. In this case, the composition will definitely turn down. It is worth remembering that even with all the tricks, the trolley can behave unpredictably. This moment must be taken into account during its management, otherwise you can decide on the collected resources.

Path activation. It is worth remembering that before the trolley goes along the rails, it is necessary to activate the tracks. To do this, you need to arrange the levers. When enabled, the cart will be able to travel a distance of 64 blocks. However, on the rises it is recommended to put them more often. In addition, electrical paths are activated by pressure rails of any redstone circuits. Minecraft is very interesting game, you can create anything in it, which means that the player will not be bored, but on the contrary, he will try to make his character's life more comfortable.

Electric rails are the most efficient trolley boosters. By building a railroad from electric rails, you can quickly move on a trolley without pressing any buttons and using coal-fired trolleys with a stove. The only disadvantage of electric rails is their difficulty in crafting, or rather, the high cost of resources. In this article we will tell you how to make energy rails in minecraft and at the same time save as many materials for the railroad as possible.

Gathering resources

To create six energy rails, you need to get six gold bars, one stick and red dust. It is possible to extract gold ore deep underground, it is immediately worth noting that it is found infrequently and in order to obtain it, you will need to dig a lot of mines. As a result, gold ore can be smelted into ingots using a furnace. Red dust is also mined at depth from the ore of the same name.

Craft energy rail

To make energy rails, arrange the resources in the following order:

Top row: two gold bars on the sides;

Center row: a stick in the middle and gold bars on the sides;

Bottom row: also gold bars on the sides and red dust in the middle.

As a result, you will get six energy rails, using which you can build a short railroad. If you want to make a long railway track, then you will need at least 18 energy rails, and this is on a flat surface.

Creation of the railway

Before you start building a railroad, you need to decide for what needs you need it. All options and rail alternations will be provided below.

On a trolley in a straight line

If you yourself want to ride the trolley on a flat surface, then you can alternate 32 conventional rails and one electric one. Thus, you can move on a trolley at a speed of 8 km per hour.

On a trolley through the mountains

For fast movement over mountainous or varied terrain, you need to alternate two simple rails and one electric one. Of course, this will require a lot of energy rails, but you will be able to move on the trolley without any jerks and braking, even going uphill.

Empty trolley

With empty trolleys, things are more complicated. The fact is that trolleys without a person are not able to use their traction, but move only thanks to the engine or rails. Therefore, even along the most direct route, it is required to build a railway alternating five simple rails with one electric one. In mountainous areas, the alternation of electric rails goes through one simple one.

The nuances of the construction of the railway track

Be aware that electric rails cannot be used to create turns, so you will have to use simple ones. Also, electric rails need a lever that will turn them on. In most cases, the levers are replaced with pressure rails, which automatically turn on when it touches the trolley.

Summarizing

Now you know how to make energy rails in minecraft. Using electric rails, you can build a huge network of railroad tracks that many players can move along, including you. Good luck!

(Visited 491 times, 1 visits today)

Energy Rail ID : 27 .

NID : in Java Edition - powered_rail . In Bedrock Edition - golden_rail .

Powered Rails - English name energy rails in minecraft. They are also called: Electric rails, Golden rail

How to get:

Electric rails, added to Minecraft 1.5 as a replacement for boosters, are a type of rail that is used to increase or slow down the speed of minecarts. At the same time, fuel for the movement of the mentioned type of transport is not required. Electric rails can be turned on and off - this is more of an interesting advantage. And to small disadvantages - the fact that the energy rails cannot be swivel, which, however, is compensated by the use of simple rails.

Railroad with power rails.

✯✯✯✯✯✯✯✯✯

How to make energy rails

Crafting energy rails in the game is quite complicated and expensive. Requires six gold bars and one unit of redstone and a stick. This crafting recipe will result in six electric rails. So, the matter, although necessary, is resource-intensive and costly.

From Minecraft version 1.9, it makes sense to look for energy rails in abandoned mines in trolleys with chests. Electric rails can be obtained by hand or with a tool. If water gets on the rails, they will fall out.

Below in the image: paths made from certain types of rails. Electric rails are laid at number one. Trolleys with residents ride on each track.

Energy burners are number one.

Use of electric rails

You need to understand that if the energy rails are not turned off, then they slow down the trolley. If you just put the trolley on electric rails, then it will not receive acceleration.

Elements such as redstone, button, lever, red torch, pressure plate, pressure rails can be involved in the activation of electric rails. The best way to activate electric rails is to use push rails in front of them, because if the minecart passes over them, they will activate and speed it up.

Options for activating energy rails with a lever and redstone.

Minecarts can accelerate up to 8 m/s, which is twice as fast as walking in Minecraft. The maximum speed can be achieved on a railroad with no difference in height, with three power rails in series. 1 m/s is 3.6 km/h. Thus, after multiplication, we get a speed of 28.8 km / h, which is quite worthy for a trolley.

Speaking of speed, you need to consider what kind of trolley moves along the rails. Since there will be one requirement for a trolley with a player, and others for an empty trolley or with a chest. Best Options for a cart with a player:

  • to maintain a speed of 8 m/s on a straight line railway - 1 electric rail and 32 simple rails;
  • on an inclined railway - 1 electric rail and 2 conventional.

A good way for a trolley with a chest or an empty one:

  • on a direct railway - 1 electric rail through 5 simple ones;
  • on an inclined path - 1 through 1.

The red torch can activate a maximum of 15 energy rails.

A deactivated electric rail slows down the cart. The friction force is usually large enough to stop it or keep it on the slope. However, if you go over an incline that exceeds 80 blocks, one disabled power rail won't be enough to nearly stop the minecart.

Energy burners - fixed

Energorels cannot make a turn when laying a railway. There are no problems with straight laying, but for turns you need to use ordinary rails. Which is shown in the picture below.

Energy burners in Minecraft cannot be swivel.

at an angle

When the path from the rails leads up the blocks installed in a zigzag, then the electric rails connect at an angle of 45 °. And also, at an angle, a trolley will pass along them. Another screenshot shows several similar possibilities.

Inclined energy rails.

The image that concludes this article, from left to right, shows:

  • energy rails (electric rails);
  • pressure rails (rails with a sensor);
  • rails;
  • activation rails.

All rails from Minecraft: electric rails in the first cell.

Related publications