In Minecraft, there are a large number of ways to move - by land, by water and even by air. One of the most accessible and important means is the railway, which can make life in the game much easier.

So, in order to get your own railway, on which you can transport a large amount of resources, you will need rails and a trolley.

Rails in the game can be of three types - conventional, electric, and pressure.

To create ordinary rails, six iron ingots and one stick are used. We arrange everything in the correct order on the workbench and get the rails.
Now it remains to place them on blocks, as a result of which they will be combined and you will get a railway. Please note that such a road can not only be straight - you can install it at an angle or with a turn.

To craft electric rails, we need a lot more resources, but it's worth it. We have six ingots of gold, red dust and a stick on the workbench.

That's all. Now we place them in the interval between the usual ones. Their main role is that they can significantly speed up minecarts that move over them. By the way, such rails must be turned on with a torch or pressure rails. The latter type can only be used on a straight road.

Let's figure out exactly how to craft pressure rails. We take six iron ingots, red dust and a pressure plate.

That's it, now you have your own rails and all the materials to create a high-speed railway.

Of course, rails and railways are not enough to transport themselves and resources. You also need to create a cart. To do this, we need five iron ingots. If you want to develop a cart with an engine, then you will also need a furnace.

If you want to put them on the railroad tracks, then just select them and right-click. But if you have a desire to put them into action, then you need to hold coal in your hand, which is the fuel for the operation of the trolley. You can get this resource deep in the mine. Remember that the mines are dark and full of various monsters. Therefore, do not forget to take a torch and weapons with you.

Thus, we learned how to create rails in Minecraft. This item is very useful because it is an integral part of the railway - the most accessible and fastest means of transportation in the game. Even a boat on water cannot move as fast as a trolley on rails. In addition, it provides the ability to transport a large amount of resources.

Energy Rail ID : 27 .

NID : in Java Edition - powered_rail . In Bedrock Edition - golden_rail .

Powered Rails - English title energy rails in minecraft. They are also called: Electric rails, Golden rail

How to get:

Electric rails, added to Minecraft 1.5 as a replacement for boosters, are a type of rail that is used to increase or slow down the speed of minecarts. At the same time, fuel for the movement of the mentioned type of transport is not required. Electric rails can be turned on and off - this is more of an interesting advantage. And to small disadvantages - the fact that the energy rails cannot be swivel, which, however, is compensated by the use of simple rails.

Railroad with power rails.

✯✯✯✯✯✯✯✯✯

How to make energy rails

Crafting energy rails in the game is quite complicated and expensive. Requires six gold bars and one unit of redstone and a stick. This crafting recipe will result in six electric rails. So, the matter, although necessary, is resource-intensive and costly.

From Minecraft version 1.9, it makes sense to look for energy rails in abandoned mines in trolleys with chests. Electric rails can be obtained by hand or with a tool. If water gets on the rails, they will fall out.

Below in the image: paths made from certain types of rails. Electric rails are laid at number one. Trolleys with residents ride on each track.

Energy burners are number one.

Use of electric rails

You need to understand that if the energy rails are not turned off, then they slow down the trolley. If you just put the trolley on electric rails, then it will not receive acceleration.

Elements such as redstone, button, lever, red torch, pressure plate, pressure rails can be involved in the activation of electric rails. The best way to activate electric rails is to use push rails in front of them, because if the minecart passes over them, they will activate and speed it up.

Options for activating energy rails with a lever and redstone.

Minecarts can accelerate up to 8 m/s, which is twice as fast as walking in Minecraft. The maximum speed can be achieved on a railroad with no difference in height, with three power rails in series. 1 m/s is 3.6 km/h. Thus, after multiplication, we get a speed of 28.8 km / h, which is quite worthy for a trolley.

Speaking of speed, you need to consider what kind of trolley moves along the rails. Since there will be one requirement for a trolley with a player, and others for an empty trolley or with a chest. Best Options for a cart with a player:

• to maintain a speed of 8 m/s on a straight line railway - 1 electric rail and 32 simple rails;
• on an inclined railway - 1 electric rail and 2 conventional.

A good way for a trolley with a chest or an empty one:

• on a direct railway - 1 electric rail through 5 simple ones;
• on an inclined path - 1 through 1.

The red torch can activate a maximum of 15 energy rails.

A deactivated electric rail slows down the cart. The friction force is usually large enough to stop it or keep it on the slope. However, if you go over an incline that exceeds 80 blocks, one disabled power rail won't be enough to nearly stop the minecart.

Energy burners - fixed

Energorels cannot make a turn when laying a railway. There are no problems with straight laying, but for turns you need to use ordinary rails. Which is shown in the picture below.

Energy burners in Minecraft cannot be swivel.

at an angle

When the path from the rails leads up the blocks installed in a zigzag, then the electric rails connect at an angle of 45 °. And also, at an angle, a trolley will pass along them. Another screenshot shows several similar possibilities.

Inclined energy rails.

The image that concludes this article, from left to right, shows:

• energy rails (electric rails);
• pressure rails (rails with a sensor);
• rails;
• activation rails.

All rails from Minecraft: electric rails in the first cell.

In this article, I will teach everyone how to make three types of rails in the world of Minecraft. Rails in this exciting game very helpful. For example, with the help of them you can lay your railway anywhere. It will be very useful if you build a railway to your mine, in order not to carry home the resources extracted in the mine. There are three types of rails in the game: simple, energy rails, rails with a sensor.

How to make simple rails

To make simple rails, for this we need the following resources: 6 iron ingots, 1 stick. We coordinate in a certain way on our workbench and get rails in the amount of 16 pieces.

You should know that it is not worth laying simple rails downhill, as this is not effective. You will not be able to drive the trolley up a steep hill. To climb a steep mountain, you need to lay energy rails.

How to make energy rails

To make energy rails you need the following resources: 6 gold bars, 1 stick, 1 red dust. We coordinate all this on a workbench and get energy rails in the amount of six pieces.

Energy rails increase the speed of the minecart on the rails. The energy rails will not be active, or rather, I will not accelerate your cart, unless you put a lever or a torch on the side of the rail. Putting a torch near such a rail, you will immediately see that it is active, by the way it will glow brightly.

How to make rails with a sensor

To make rails with a sensor, we need resources such as: 6 iron ingots, one pressure plate, one red dust. Having added the resources in a certain way on the workbench, we will get rails with a sensor in the amount of six pieces.

Strange as it may seem, but rails alone are useless. In order to move around them, we need a trolley.

How to make a trolley

The trolley is intended for movement and transportation of cargo. In order to make a trolley, we need 5 iron ingots, and stack them in a certain way on a workbench.

Electric rails are the most efficient trolley boosters. By building a railroad from electric rails, you can quickly move on a trolley without pressing any buttons and using coal-fired trolleys with a stove. The only disadvantage of electric rails is their difficulty in crafting, or rather, the high cost of resources. In this article we will tell you how to make energy rails in minecraft and at the same time save as many materials for the railroad as possible.

Gathering resources

To create six energy rails, you need to get six gold bars, one stick and red dust. It is possible to extract gold ore deep underground, it is immediately worth noting that it is found infrequently and in order to obtain it, you will need to dig a lot of mines. As a result, gold ore can be smelted into ingots using a furnace. Red dust is also mined at depth from the ore of the same name.

Craft energy rail

To make energy rails, arrange the resources in the following order:

Top row: two gold bars on the sides;

Center row: a stick in the middle and gold bars on the sides;

Bottom row: also gold bars on the sides and red dust in the middle.

As a result, you will get six energy rails, using which you can build a short railroad. If you want to make a long railway track, then you will need at least 18 energy rails, and this is on a flat surface.

Creation of the railway

Before you start building a railroad, you need to decide for what needs you need it. All options and rail alternations will be provided below.

On a trolley in a straight line

If you yourself want to ride the trolley on a flat surface, then you can alternate 32 conventional rails and one electric one. Thus, you can move on a trolley at a speed of 8 km per hour.

On a trolley through the mountains

For fast movement over mountainous or varied terrain, you need to alternate two simple rails and one electric one. Of course, this will require a lot of energy rails, but you will be able to move on the trolley without any jerks and braking, even going uphill.

Empty trolley

With empty trolleys, things are more complicated. The fact is that trolleys without a person are not able to use their traction, but move only thanks to the engine or rails. Therefore, even along the most direct route, it is required to build a railway alternating five simple rails with one electric one. In mountainous areas, the alternation of electric rails goes through one simple one.

The nuances of the construction of the railway track

Be aware that electric rails cannot be used to create turns, so you will have to use simple ones. Also, electric rails need a lever that will turn them on. In most cases, the levers are replaced with pressure rails, which automatically turn on when it touches the trolley.

Summarizing

Now you know how to make energy rails in minecraft. Using electric rails, you can build a huge network of railroad tracks that many players can move along, including you. Good luck!

(Visited 491 times, 1 visits today)

Today we will talk about how to make rails in Minecraft world. The railway provides an opportunity to significantly reduce travel time. It is not enough to have a trolley and ordinary rails in order to increase the speed of movement. The intended path can be followed, but it will be very slow. In the game, the main accelerator is electric rails, but in order to create them, many difficulties must be overcome.

Minecraft world: how to make energy rails?

We will need This component is the main one in deciding how to make the rails. Since gold can be hard to mine, electrical lines become a valuable block. Several methods can be used here. For example, melt or combine nuggets. You can also do the destruction of zombie pigmen. most popular and in a simple way smelting of gold ore is considered. It will take 6 ingots to create six electric rails. The next stage is red dust. It is necessary to find a block of such ore, take a pickaxe and destroy it. Usually 4-5 units of red dust are obtained from one element. In the world of Minecraft, it is a kind of "wire". It takes one red dust to get 6 units of electrical mains. Also, to solve the question of how to make rails, we need a stick, we will get it. To do this, you need to cut down a tree and make boards. Of these, you need to get sticks. This element can be used for both simple and electric rails.

Process of creation

It is necessary to place gold ingots along the edges, put red dust down, and a stick in the center. If you plan to create a large number of electric rails at the same time, then you need to increase the amount of resources several times. To make the maximum number of blocks from the available materials, you will need to press the Shift key and click on the crafting window.

Acceleration process

In the event that electric rails are installed next to the usual ones, the opposite effect will occur - the trolley will brake. Countering this state of affairs will require the use of a red torch and a pressure plate. Thanks to this, the electric rails will be activated and the trolley will be able to increase its speed. But over time, it will still begin to fall. It is constantly necessary to alternate electric and conventional rails so that a high speed is maintained throughout the entire time. The proportion can be changed depending on the situation. So we figured out how to make rails.