How to put a standard sight in cs go. Commands for setting up the WUA sight in CS GO

Players who have dealt with CS:GO– often face the problem of an uncomfortable standard sight. For some, it seems too small, while others would like to change the color of the sight to be brighter and more noticeable. This article is entirely devoted to the issue - how to change crosshair in CS:GO, and therefore, if he worries you - sit down comfortably!

In the CS:GO settings, you can only change scope style and colors. But if you resort to console commands, then the possibilities will increase significantly.

Changing the shape of the crosshair in CS:GO, as well as its color style

The most famous way to change the look of the crosshair to make it more user-friendly is through the game options. To get to the settings menu, you must press the ESC key, and then go to the section "Settings and Help", find there "Game Options", then "Interface Settings". In the menu that opens, in the fields of the style and color of the sight, you must select the desired indicators!

Crosshair style in CS:GO

The second, less popular, but very efficient way is to enter special commands through the game console. Just press the "~" key, and write the necessary command in the line. For example, the command “cl_crosshairstyle” is responsible for setting the style of the crosshair in the game, adding a number from zero to four after it at the end after it with a space, you can get a new shape of the crosshair.

Change crosshair color in CS:GO

By the same principle, the color settings of the sight change, but this time the command will be a little different, namely "cl_crosshaircolor". Adding a number from zero to five at the end, we get a new color of the sight.

Add a dot to the crosshair CS:GO

In order to add a dot in the middle of the sight, you need to enter “cl_crosshairdot” into the console, and write zero or one through the space, where zero is responsible for the absence of a dot, and one is the presence.

How to change the size of the sight in cs go?

If the player is not satisfied with the size of the sight, then this is also fixable by the console. Just enter the command "cl_crosshairsize", and after a space at the end, enter the value zero, five or ten. Accordingly, the larger the value, the larger the scope.

Conclusion

Now you know, how the crosshair changes in CS:GO, which means that it will become even more interesting to play, and even more convenient - if you approach the issue from a purely aesthetic side!

In the CS:GO settings, there are only two options dedicated to the crosshair: crosshair style and crosshair color. However, the adjustment of the sight is not limited to these two parameters. In this article, we will look at how to customize the sight for yourself using commands in the console.

Most of the article is devoted to setting the crosshair through console commands, so we recall that by default, to call the console, you need to press the ~ key (usually located under the Esc key).

How to change crosshair style and color in CS:GO

For those who are not in the know, first we will analyze how to change the style and color of the sight. The first, well-known way, is to select the desired option in the settings:

Press the ESC key => Help and Settings => Game Options => Interface Settings

Here in the fields Scope style and Crosshair color choose the values ​​we need.

The second way is console commands. To customize the crosshair style in CS:GO, use the command cl_crosshairstyle

• cl_crosshairstyle 0 - default (dynamic)
• cl_crosshairstyle 1 - default (static)
• cl_crosshairstyle 2 - classic
• cl_crosshairstyle 3 - classic (dynamic)
• cl_crosshairstyle 4 - classic (static)

To set the crosshair color in CS:GO, use the command cl_crosshaircolor

• cl_crosshaircolor 0 - red
• cl_crosshaircolor 1 - green
• cl_crosshaircolor 2 - yellow
• cl_crosshaircolor 3 - blue
• cl_crosshaircolor 4 - blue
• cl_crosshaircolor 5 - custom color

Crosshair with a dot in CS:GO

To add a dot in the middle of the sight, you must use the command cl_crosshairdot:

• cl_crosshairdot 0 - no dot
• cl_crosshairdot 1 - there is a point

Here are two screenshots for an example, the CS:GO crosshair without a dot and with it.

Crosshair stroke in CS:GO

To enable or disable crosshair stroke in CS:GO, use the command in the console cl_crosshair_drawoutline

• cl_crosshair_drawoutline 0 - crosshair without outline
• cl_crosshair_drawoutline 1 - crosshair with a stroke

Below are two screenshots for those who don't know what crosshair stroke is in CS:GO. On the left - a sight without a stroke, on the right - with it.

In order to set the thickness of the stroke (contour) of the sight, there is a command cl_crosshair_outlinethickness: the parameter can take a value from 0 to 3 (the larger the value, the thicker the outline):

• cl_crosshair_outlinethickness 0
• cl_crosshair_outlinethickness 2

Crosshair transparency in CS:GO

To set the transparency of the sight, the command cl_crosshairalpha. The parameters of this command can take values ​​from 0 to 255, the smaller the value, the more transparent the crosshair will be. Here are some examples of using this command:

• cl_crosshairalpha 0 - the sight is completely transparent (it is not visible at all)
• cl_crosshairalpha 127 - sight is translucent (50% transparent)
• cl_crosshairalpha 255 - crosshair is completely opaque

Below are two screenshots, on the first one the sight is translucent (cl_crosshairalpha 127), on the second it is completely opaque (cl_crosshairalpha 255).

There is also a command cl_crosshairusealpha, which enables/disables crosshair transparency mode. If the transparency mode is disabled, then set the transparency of the sight using the command cl_crosshairalpha fail.

• cl_crosshairusealpha 0 - transparency mode disabled
• cl_crosshairusealpha 1 - transparency mode enabled

Those. before use cl_crosshairalpha you need to make sure the value cl_crosshairusealpha is 1 (it is by default).

Crosshair size in CS:GO

The desired crosshair size can be set using the console command cl_crosshairsize. The larger the value of the parameter, the larger the scope size. Command usage examples:

The screenshots below show the scope size 0, 5 and 10 respectively.

Distance between lines of sight

Team cl_crosshairgap allows you to reduce or increase the distance between the lines of sight. In fact, this console command changes the size of the CS:GO crosshair to some extent. It can take both positive and negative values ​​as parameters:

Screenshots with the above examples:

Sight line thickness

You can adjust the thickness of the sight lines using the console command cl_crosshairthickness: The larger the value of the parameter, the thicker the lines of sight. Examples:

Screenshots of these two examples:

Showing and hiding crosshairs

simple command cross hair shows/hides crosshair. If you suddenly lost your crosshair in CS:GO, check this command.

• crosshair 0 - crosshair is not displayed
• crosshair 1 - crosshair is displayed

Other console commands

Finally, we list all the other commands that we will not consider for the reason that they are used very rarely. Here is a list of other commands that affect crosshair behavior in CS:GO:

• cl_crosshair_dynamic_maxdist_splitratio
• cl_crosshair_dynamic_splitalpha_innermod
• cl_crosshair_dynamic_splitalpha_outermod
• cl_crosshair_dynamic_splitdist
• cl_crosshairgap_useweaponvalue
• cl_crosshairscale

We hope this article was helpful, and the console commands listed here will help you customize your CS:GO crosshair to suit your needs.

You paid attention to how, at times, it is not easy to aim at the enemy when the size of the scope is large, and stray bullets fly for other purposes. Therefore, the developers have provided a personal selection of sights. You will be able to choose the color scheme, thickness, size and scalability. In the CS:GO settings, the sight has only 2 parameters: color and shape of the sight. However, on these 2 parameters, the adjustment of the sight does not end there. In this article, we will analyze how to customize the sight to your taste thanks to the commands in the console.

If you do not want to delve into this material in its entirety, then we have outlined a summary, using it you can find the necessary setting.

A significant part of the material tells about setting the sight using console commands, so we note that by default, to open the console, you must press the tilde button: ~ (located under the Esc key).

How to customize crosshair style and color in CS:GO

First, let's talk about how to customize the style and color of the crosshair. The first and generally accepted way is to select the required option in the settings:

Click on the gear icon (Settings) → Game settings → Interface

Here in the fields Scope style and Crosshair color we select the following values ​​we need.

The second way is console commands. The crosshair style settings in CS: GO are controlled by the option cl_crosshairstyle

• cl_crosshairstyle 0 − standard (dynamic)
• cl_crosshairstyle 1 - standard (static)
• cl_crosshairstyle 2 − classic
• cl_crosshairstyle 3 - classic (dynamic)
• cl_crosshairstyle 4 - classic (static)

To customize the crosshair color in CS: GO, use the option cl_crosshaircolor

• cl_crosshaircolor 0 - red
• cl_crosshaircolor 1 - green
• cl_crosshaircolor 2 - yellow
• cl_crosshaircolor 3 - blue
• cl_crosshaircolor 4 - blue
• cl_crosshaircolor 5 - arbitrary color

Just like how to recolor the crosshair in black, white or any arbitrary color using the commands: cl_crosshaircolor_b , cl_crosshaircolor_g, cl_crosshaircolor_r, they can be found in a separate .

Crosshair with a dot in CS:GO

To insert a dot in the middle of the sight, you should use the option cl_crosshairdot :

• cl_crosshairdot 0 - no dot
• cl_crosshairdot 1 − dotted

Here are 2 screenshots for clarity, the CS: GO scope with and without a dot.

Outlining (Stroke) of the crosshair in CS:GO

To activate or remove crosshair stroke in CS: GO, use the option in the console: cl_crosshair_drawoutline

• cl_crosshair_drawoutline 1 - stroke enabled
• cl_crosshair_drawoutline 0 - stroke disabled

The screenshots below show what a crosshair stroke is in CS: GO. On the right - a sight with a stroke, on the left - without it.

In order to set the boldness of the contour (stroke) of the sight, there is an option cl_crosshair_outlinethickness : it can take values ​​from zero to 3 (the larger the value, the bolder the stroke):

• cl_crosshair_outlinethickness 0
• cl_crosshair_outlinethickness 2

Crosshair transparency level in CS:GO

To set the transparency of the sight, use the option cl_crosshairalpha. The parameters of this option can use values ​​from zero to 255, the higher values ​​make the crosshair more transparent. Examples of using this option:

• cl_crosshairalpha 0 - full transparency of the sight (it is almost invisible)
• cl_crosshairalpha 125 - translucent crosshair (transparency level 50%)
• cl_crosshairalpha 255 - fully opaque crosshair

There is also an option cl_crosshairusealpha, which enables or disables the crosshair's transparency mode. When the transparency mode is disabled, then set the transparency of the sight using the option cl_crosshairalpha impossible.

• cl_crosshairusealpha 1 - turns on the transparency mode
• cl_crosshairusealpha 0 - disables transparency mode

In other words, before activating the option cl_crosshairalpha make sure the value cl_crosshairusealpha is equal to one (it is the same by default).

Crosshair size in CS:GO

The required size of the sight can be set using the option cl_crosshairsize. The largest value of the parameter increases the size of the crosshair.

Examples of using this option:

• cl_crosshairsize 10
• cl_crosshairsize 5
• cl_crosshairsize 0

The screenshots below show a scope with size: 10, 5 and 0.

Sight line distance

Teams cl_crosshairgap and cl_fixedcrosshairgap allow you to expand or shorten the distance between the lines of sight. In fact, this console option changes the size of the CS: GO crosshair to a certain extent. In the form of parameters, it can take positive and negative values:

• cl_crosshairgap 5 and cl_fixedcrosshairgap 5
• cl_crosshairgap 0 and cl_fixedcrosshairgap 0
• cl_crosshairgap -5 and cl_fixedcrosshairgap -5

Here are screenshots with the above examples:

Sight outline thickness

It is possible to set the thickness of the contour (lines) of the sight using the console option cl_crosshairthickness: Larger option value - thicker scope outline. Options examples:

• cl_crosshairthickness 3
• cl_crosshairthickness 0

Screenshots of these examples:

Show or hide crosshair

Simple option cross hair displays or hides the crosshair. In the case when the crosshair disappeared in CS: GO - check the value of this option.

• crosshair 1 - enable crosshair display
• crosshair 0 - turn off crosshair display

Crashz' Crosshair Generator v3

• Works purely in single-user mode with bots
• Huge variety of scopes for PRO players
• The sight is automatically saved and does not require additional commands
• Has slots to save your sights
• There is a shooting range on the map where you can practice on bots

Other console options (commands)

In conclusion, we will indicate all the other commands that you will not take into account for the reason that they are used quite infrequently.

Options that remove the top of the scope:

• cl_crosshair_t 1 - delete
• cl_crosshair_t 0 - return back

An example of such a sight:

List of other options that change crosshair behavior in CS:GO:

• cl_crosshairgap_useweaponvalue- Defines the transformation of the crosshair when switching between different weapons
  
• cl_crosshair_dynamic_maxdist_splitratio- How wide will the crosshairs diverge when running, jumping and sitting
  
• cl_crosshair_dynamic_splitalpha_innermod− Transparency of the inner crosshair when running and jumping
  
• cl_crosshair_dynamic_splitalpha_outermod− Transparency of the outer crosshair when running and jumping

We believe that this material has helped you and the recommendations outlined here on the use of console commands (options) will make setting up the CS: GO crosshair for your unique playing style simple and straightforward.

If you want to put a standard sight from CS 1.6, then you can do it. How? Read more:
But if you do not like it, then you can change it for this:
- Log into CS:GO
- Start playing on some map
- Press the "Esc" button
- Choose "Help and settings"
- Choose "Game Options"
- In the item "Sight style" select "Classic"
- Press "Back" and "Resume game"

You can add a small dot in the center of the sight, for this, write the following command in the console:
cl_crosshairdot 1

To increase the size of the sight, write the command:
cl_crosshairsize 7 or cl_crosshairsize 10 (can be any value)

To increase the thickness of the sight, write the command:
cl_crosshairthickness 1 (this variable also changes to different values)

That's all. Now the sight has become the same as it was in cs 1.6.

Well, for those who are especially curious and lovers of experiments, and those who like to set up CS longer, or are not satisfied with the standard sight from 1.6, here are the advanced settings of the sight and their description:

And so below each team separately.

cl_crosshairstyle

Sets the appearance of the crosshair:

cl_crosshairstyle "0" = Standard from CS:GO, dynamic (expands when shooting).
cl_crosshairstyle "1" = CS:GO Standard, static (does not expand when shooting).
cl_crosshairstyle "2" = Classic from CS:1.6, dynamo-statistical (does not expand much when fired).
cl_crosshairstyle "3" = Classic from CS:1.6, dynamic (expands when fired).
cl_crosshairstyle "4" = Classic from CS:1.6, static (does not expand when shooting).

cl_crosshairsize

With the cl_crosshairsize command, you can set the crosshair height (see screenshot above). The higher the value, the higher the aim height.

cl_crosshairthickness

With the cl_crosshairthickness command, you can set the crosshair width (see screenshot above). The higher the value, the greater the scope width.

cl_fixedcrosshairgap

Only possible with a bunch of cl_crosshairstyle "0" and "1" commands.

With the cl_fixedcrosshairgap command, it is possible to change the distance between the beams (strips) of your sight, you can either narrow the distance or widen it. The default value of the command is cl_fixedcrosshairgap "3", the smaller you set the value, the closer the distance of the beams will be.

cl_crosshaircolor

With this command you can set the color of the crosshair.

The following values ​​are available for this command:

0 = Red.
1 = Green (standard).
2 = Yellow.
3 = Blue.
4 = Blue.
5 = Allows you to add your own color.

When setting the value to "5", 3 more values ​​of your colors in RGB colors become available to you. The choice is possible from "0" - weak tonality of colors, to "255" - strong tonality of colors.

cl_crosshaircolor_r

This team puts up red colors.

cl_crosshaircolor_g

This command exposes green colors.

cl_crosshaircolor_b

This command exposes blue colors.

Each of the above three commands can range from "0" to "255", the higher the value, the brighter the color.

cl_crosshaircolor "5"
cl_crosshairstyle "4"
cl_crosshaircolor_r "255"
cl_crosshaircolor_g "51"
cl_crosshaircolor_b "204"

Thus, our crosshair will be pink! You can find a table of RGB colors on the Internet by typing "RBG Color Scheme" into Google.

cl_crosshairusealpha

Only possible with a bunch of cl_crosshairstyle "2" and "4" commands.

With this command you can set the transparency of your sight. If you select "0", you will turn off the transparency and get the full contrast of the crosshair. If "1" is selected, you are given the option to select the transparency of the crosshair with the cl_crosshairalpha command.

cl_crosshairalpha

Only possible with a bunch of cl_crosshairstyle "2" and "4" commands.

With this command you can set the transparency strength from "0" to "255", the higher the value, the less transparency.

Only possible with a bunch of cl_crosshairstyle "2" and "4" commands.

With the value of the cl_crosshairdot command "1" you get a dot in the center of your sight (cross).

I hope you understand everything and this guide helped you.
For those who liked it, like it, well, you can throw off the drop a little, I won't mind. You can't try to cheat. :)

Guide to shooting from sniper rifles in Arma 2, if you liked it and helped you, put Like

So, today we'll update our autoexec.cfg again. In this lesson, we will create our own personal sight.

We will not set up the sight through the game interface, but we will set it up through console commands. Let's get started.

Aim adjustment commands in CS:GO

How to change aim?

cl_crosshairstyle - crosshair style setting in CS:GO

cl_crosshairstyle 0 - default (dynamic)
cl_crosshairstyle 1 - default (static)
cl_crosshairstyle 2 - classic
cl_crosshairstyle 3 - classic (dynamic)
cl_crosshairstyle 4 - classic (static)
cl_crosshairstyle 5 - classic (as in 1.6 it expands a little)

What is the difference between dynamic and static sight?

- The answer is simple. Dynamic sight expands when running, shooting, jumping. Static remains unchanged.

How to change the color of the crosshair?

cl_crosshaircolor - crosshair color in CS:GO

cl_crosshaircolor 0 - red
cl_crosshaircolor 1 - green
cl_crosshaircolor 2 - yellow
cl_crosshaircolor 3 - blue
cl_crosshaircolor 4 - blue
cl_crosshaircolor_r - custom color
cl_crosshaircolor_g - custom color
cl_crosshaircolor_b - custom color

* For example, if you want to get a white crosshair:

cl_crosshaircolor_b "255"
cl_crosshaircolor_r "255"
cl_crosshaircolor_g "255"

How to draw a scope?

cl_crosshair_drawoutline - crosshair outline in CS:GO

cl_crosshair_drawoutline 0 - crosshair without stroke
cl_crosshair_drawoutline 1 - crosshair with a stroke

How to change the thickness of the crosshair stroke?

cl_crosshair_outlinethickness - CS:GO crosshair outline thickness

cl_crosshair_outlinethickness 0
cl_crosshair_outlinethickness 2

How to turn on crosshair sight transparency mode?

cl_crosshairusealpha – enables/disables crosshair transparency mode in CS:GO

cl_crosshairusealpha 0 - Crosshair transparency mode disabled
cl_crosshairusealpha 1 - Crosshair transparency mode enabled

How to change the transparency of the sight?

cl_crosshairalpha - crosshair transparency in CS:GO

cl_crosshairalpha 0 - the sight is completely transparent (it is not visible at all)
cl_crosshairalpha 127 - the sight is translucent (50% transparent)
cl_crosshairalpha 255 - crosshair is completely opaque

How to change crosshair size?

cl_crosshairsize - crosshair size in CS:GO

cl_crosshairsize 0

cl_crosshairsize 10

How to make an aim point?

cl_crosshairdot - crosshair dot in CS:GO

cl_crosshairdot 0 - no dot
cl_crosshairdot 1 - there is a point

cl_crosshairdot 1

cl_crosshairdot 0

How to zoom in/zoom out?

cl_crosshairgap - distance between lines of sight in CS:GO

cl_crosshairgap -5
cl_crosshairgap 0
cl_crosshairgap 5

cl_crosshairgap 5

cl_crosshairgap -5

How to change the thickness of the sight lines?

cl_crosshairthickness - thickness of crosshair lines in CS:GO

cl_crosshairthickness 0

How to turn off the sight?

crosshair – enables/disables crosshair in CS:GO (useful for moviemaking)

crosshair 0 - crosshair is not displayed
crosshair 1 - crosshair is displayed

Commands that no longer work:

cl_crosshair_dynamic_maxdist_splitratio
cl_crosshair_dynamic_splitalpha_innermod
cl_crosshair_dynamic_splitalpha_outermod
cl_crosshair_dynamic_splitdist
cl_crosshairgap_useweaponvalue
cl_crosshairscale

Here's an example of my scope:

cl_crosshairsize 4.7
cl_crosshairgap -1
cl_crosshairdot 1
cl_crosshairthickness 1

cl_crosshair_outlinethickness 1
cl_crosshairstyle 4

There is also a very useful thing as a sight generator. There you can customize the sight directly for yourself. As usual, I attach what happened at the moment.

In we will talk about customizing the elements of the game interface.